Classic 30 amp sim layout ( veroboard )

[MartyMart]

http://aronnelson.com/gallery/Martys-layouts-and-photos/Classic_35?full=1

Here you go, superb sounding Jfet amp simulator, with a blendable separate totally "clean" path, good
drive and a nice "spanky" tone.

Gets VERY close to the original's "voice" 
C9 ( 470n ) is a poly film cap, not electro if poss !!
Reverse protection diode can be 1N4001/1N4002 ...

MM.

[MartyMart]

BUMP .... 74 views/downloads  ??

I know the forum gets "busy" these day's, but this circuit is NOT an "also ran"

Sounds very, very fine indeed, so want you all to see it/ build it ! 

Enjoy,
MM.

[StephenGiles]

Thanks Marty, looks very good indeed. I don't know if you are familiar with Richard Shindell, a singer songwriter from the USA who now lives in Buenos Aires,  but I have been listening to a fair amount of his stuff recently. I have just downloaded a set he did at McCabes guitar shop in New York and the sound of his accoustic guitar is very very good. He uses a very crisp percussive picking style, similar to our very own Nic Jones - remember him? But it made me think that it would be nice to have a combined piezo preamp/amp simulator setup.

[RDV]

Marty:

I was looking at the schematic here rather than the vero layout since I perf rather than vero and noticed that on the schem that 470nF you're referring to in your previous post is a 47µF in the schem. Do you decide later that a 470nF sounded better? If so, those big 470nF I sent you should work great for that. That's what I'll be using.

RDV

[MartyMart]

My apologies, that should always have been 470n (0.47uf) and NOT 47uf !!
I'll have to edit and re-post the schem
Lookin forward to 'em ..... this is a little cracker BTW

Marty.

Edit :
Here it is : http://aronnelson.com/gallery/Martys-layouts-and-photos/Classic35new?full=1