JCM 800 Emu. Few Questions?!!!!

[AC30Dirty]

Hey guys. I have decided to tackle the JCM 800 emulator project from Eric Hansens website. I have done search here and now am confused about a few things, so here goes. 1. Is the pcb layout on Hansen's site drawn by Buck Sears the correct one? I transfered it already and made the holes ready for mounting the parts when i came across this. 2. Is there a layout on how to connect the jacks and the on/off switch? I would like to make it true bypass and use a 3pdt switch if possible.

[AC30Dirty]

I read on Eric Hansesn's site that some mods to this pedal can be done the same as mods to a ROG Thunderchief. Does this mean that i could possibly hookup the jacks and the switch the same? Any info on this project would be great. Thanks

[tcobretti]

You can pretty much always hook up the jack and switch the same.

You should be able to figure out the wiring from this link.
http://www.generalguitargadgets.com/pdf/ggg_thunderchief.pdf

Basically the only wires you will ignore are the gain pot's and the power jack's.

Sorry, I don't know anything about that PCB.

[AC30Dirty]

Thanks tcobretti. Maybe ill have to figure this one out all on my own. Still if anyone has any info please let me know. Thanks
 

[tcobretti]

What you need to do is take the schematic for the pedal and compare it to the PCB.  It's easy, just takes a little patience.  You just go component by component and make sure it's going where it needs to.  Even if the PCB is flawed I bet you could make it work if you figure out exactly what is wrong.