News:

SMF for DIYStompboxes.com!

Main Menu

Sin Amp Question

Started by saemskin, October 05, 2006, 08:09:32 PM

Previous topic - Next topic

saemskin

The tonpad version lists some goofy switches I didnt notice until last night.  I ordered them, but I have the baord complete now.
Can I jump one of the 3 selector positions to the 0 postion to simulate a position of the switch so I can see if it works?  Or is that too easy to be something that would work for me  :icon_wink:
Josh
...................................
SAEMSKIN RECORDINGS
http://www.saemskin.com

RickL

Not sure exactly what you mean by "the 0 position" but there is no reason why you can't temporarily jumper the pads to simulate the switch being in one position to confirm that the pedal works. Keep in mind that each switch is a 2p3t switch so you'll have to jump two sets of pads for each of the three switches. If you don't mind doing the work you could confirm that each of the three positions of each switch work by simply changing the positions of the jumpers.

saemskin

that's what I was wondering.

Thanks!
Josh
...................................
SAEMSKIN RECORDINGS
http://www.saemskin.com