Could someone help me out with wiring this?

[armorefist316]

Im not sure if this is wored up completely wrong or not. I kept the led hooked up like that because thats how it was origionally. I dont really care if its TB or not, but i have  the switch in the picture and a 3PDT. Its wired like that now, and when its bypasses, i get a clean guitar signal but when i step on the switch, its silent. Could someone help me out?

BTW: Its an old analog chorus and i can take pictures of the board if that would help. I dont really care how its wired as long as it works and has an led hooked up.

[armorefist316]

Here are some pics of the board:

[Dan N]

Hard to tell. The switch sure does look like a proper true bypass hookup- jacks to the poles, one throw jumped, other throw to the board. Are you sure you are plugging your guitar into the input (as opposed to the output) jack?

[armorefist316]

yeah....ive tried that already. A guy on HC said he thought the green wire looked like ground. Could anyone confirm that? If the green is ground, then what would the imput and output wires be?

[MikeH]

I second the notion that the green wire looks like it is hooked up to the trace that appears to be the ground (usually the big, fat trace that goes around the outside is the ground, but not always).  But I couldn't tell you which is the input or output.  Audio probe?

[armorefist316]

someone else told me about the audio probe. I will try that tonight and see if i can figure it out