Goof Off

[RLBJR65]

http://www.valspar.com/val/resident/goof-off.jsp
The aresol spray can works great for cleaning goop off of pcb's after etching.
I made a couple of boards today using the Laser Jet / Photo paper method also touched up a few spots with a sharpie.
Spray the Goof Off on and everything practically runs off! A little soap and water is needed to clean the residue from the goof off.

This stuff smells suspiciously like carburetor cleaner.

[Mark F]

I don't know if this holds true with the spray but the liquid is quite harsh on some plastics. It tends to melt acrylic.

[Peter Snowberg]

It's a combination of solvents, but the primary one is xylene. Xylene is nice because it is non-polar and mildly aggressive.... somewhat like slow motion acetone.

[RLBJR65]

Laser jet toner is actually a form of plastic isn't it?
Also don't get the stuff on any painted, stained or varnished finish.

[markm]

Should try to avoid the fumes too....

[Paul Perry (Frostwave)]

Xylene is a pretty toxic chemical (in my opinion).
http://www.osha.gov/SLTC/healthguidelines/xylene/recognition.html
I certainly wouldn't use it in a family environment.