Layouts in DIY creator

[hank reynolds 3rd]

Hi,
heres some layouts I've done in the DIY layout creator....
I haven't had chance to build them yet,but I've checked and they look ok to me...
Mutron Micro V



EH Octaver basic





Hmmm...didn't expect to see those etra holes on the switches etc...I'll try an upload them again w/out....

Thanks
Sam

[Xavier]

Whoa !!!

Thanks !!

What's the Mutron, a phaser?

[hank reynolds 3rd]

I built both these from a hand drawn pcb,but opted to redo them iy DIY layout creator,as its way neater

The Mutron V is just an autowah, one knob for range,the switch for guitar/bass...
sounds quite nice,IMO...

[markm]

Looks good.
The only problem I can see at a quick glance is the jumpers.
You may want to relocate those as to not come so close to the pins of the trannies and op amps.
It could be done in a straight shot for each one.

[hank reynolds 3rd]

Moved the jumper the 9V+...

[hank reynolds 3rd]

FWIW,the resistors are upright in some places,as I was trying to make as compact a layout as possible:P

Is there anyway to upload the .diy file here ??

Ta
Sam

[Seljer]

you can usually get away with placing jumpers under ICs too (or use IC sockets if there isn't enough space when you're soldering together)

and I think with some shifting stuff around you should be able to move C4 over there above R12 somehow and get rid of that jumper (but the DIY Layout Creator program isn't really good at that kind of arranging  )
move the top half of R10 one hole to the right and I think you can get it in there

[hank reynolds 3rd]

Here we go

(aron:feel free to delete the previous entries if you want)

[audioguy]

Yeah .diy would be great!! How about uploading them directly to DIY Fever?

[bancika]

yeah, submit them man 

[Peter Snowberg]

You can also have a free gallery account here. Check out the "Layouts Gallery" in th eline of links just below the blue bar at the top.

PM Aron for an account and he'll set you up.

[hank reynolds 3rd]

Hi,
I submitted them last night to DIY fever,but it said something like 'pending:7' ,so I left it at that....
Thanks for the info Peter,I'll try to sort out later today(at work at the moment)....
I've got a couple of other things to finish up,but my PC at home is running really slowly i Creator now, as they're pretty big layouts (Mutron Octaver and Pearl Octaver)...........

Thanks

Sam