rebote 2.5 build report...

[jonathan perez]

well, i got the board in the mail today (THANX $UPERPUMA!), and got right to work...

debugged for about 10 minutes, and got it working...

and after a few MAJOR modifications to the ts9 tubescreamer box, my delay was complete...





the board fit well, and i kept the original jacks...but the switch needed some major drilling to fit...what a mess! but totally worth it...

9volt adapter only.

2 questions!

1. how can i get the delayed signal to be louder? its VERY quiet.

2. can i get MORE brightness on the repeated notes? i know its meant to be like this, but id like more brightness.

[Cliff Schecht]

Is your "mix" pot not functioning like it should? Mine can go from no delay to slapback to full on delay only with no problem

[jonathan perez]

i gotta check the value, i hope i didnt blow it...

[axeman010]

Hi

gotta say mine's the same, goes from no delay to loads !!!

Also must be lucky as mine has no clicks or distortion. Signal quality does degredate
slightly near max delay.

Its a great pedal, would not be without it now !!!

Axeman.

[jonathan perez]

ok, the pot was a 100kA, not 100kB...so i switch em, and...well, now i only get single repeats, and i didnt get any noticable delay volume increase...any ideas?

[blanik]

the 33k resistor above the 8 pin IC... lower it to 20k or 22k, you'll get more range from your effect level pot...

R

[jonathan perez]

didnt notice much of a difference, and im still getting single repeats...time to start pokin around! 

[jonathan perez]

ok, got the repeats fixed (broken wire)

but now ive still got to do something about the level...ive got it maxed, with the resistor above the IC at 22k.

ill try a lower value...

[jonathan perez]

tried 10k FAAAAAAAAANTASTIC...

thanx guys!

ill have sound samples up on my sunshine wahs page later today. 

[$uperpuma]

 

[blanik]

cool, i'll try 10k too... my level is almost maxed out when i play with the full band... so a little reserve power would be reassuring 

R.
have you seen the stereo mod... sounds great if you have two amps... dry on one side and only the repeats in the other... sounds HUGE!
http://www.diystompboxes.com/smfforum/index.php?topic=52726.0

[jonathan perez]

i have 2 cabs going, right now. when i get the extra head, i will do it FOR SURE...