Dean Hazelwanter Super Simple Switcher Help

[ik6gpy]

I'm building this switcher (GGG), and i just want to know if i need  Momentary SPST for the switches or i need to feed the relays with a continuous voltage through a normal SPST switch? Thanks

http://www.generalguitargadgets.com/index.php?option=content&task=view&id=211&Itemid=236

[Dean Hazelwanter]

You could use momentary switches, if you wanted the loop(s) to stay on only while the switch is pressed. If you want to press the switch - the loop(s) come on, press again - the loop(s) go off, don't use a momentary. You could even use non-momentary switches for most of the channels, and have 1 momentary for the loop you want to engage only while the switch is being pressed.

Make sense?

[ik6gpy]

Many thanks! That was quite a stupid question. Thanks again