New circuit: Dreck

[g3rmanium]

Mini-Booster-based booster/overdrive with some modifications:

[debutvm]

Cool, where did you get that case?

[Seljer]

Cool, where did you get that case?

looks like one of the transparent hammond enclosures
http://hammondmfg.com/dwg2c.htm
?

[MartyMart]

That must sound nice and "fat"
Looks like a Maplins see through case 

MM

[g3rmanium]

looks like one of the transparent hammond enclosures
http://hammondmfg.com/dwg2c.htm
?

Yes, it's a Hammond polycarbnoate case. I can't recommend them though because they're not really rigid.

[Short Circuit]

I am fairly new to this and I have plans to build this particular circuit from Jack Orman.
Do you have the 100k for a volume out?
The 100uF and the switch...... What does that switch do in terms of the sound
Also at Q2 there is a jumper that  goes from C5 to E5. But it is broken by the cut at D5. Should that jumper go across that cut

Mark

[g3rmanium]

Do you have the 100k for a volume out?

Sure, I will add that to the plan.

The 100uF and the switch...... What does that switch do in terms of the sound

Louder and MORE distortion.

Also at Q2 there is a jumper that  goes from C5 to E5. But it is broken by the cut at D5. Should that jumper go across that cut

Right, the jumper goes over the cut, on the other side of the board.

[Short Circuit]

Thanks for the clarafication. 

Mark