One knob fuzz project- parts list?

[hw2nw]

Hi guys,

Trying to put together a parts list for the Colorsound One-Knob Fuzz project as found here http://aronnelson.com/gallery/album21/COLORSOUND_ONE_KNOB_FUZZ

I thought it might be possible someone has already put one together and has a complete parts list. If I could get my hands on one, that would be awesome and save me a bit of struggle sourcing parts.

Thanks!

[black mariah]

Capacitors
1 x 220pF
1 x .1uF
1 x .22uF
1 x 10uF electro
1 x 100uF electro

Resistors
1 x 820R
1 x 1k
1 x 2k2
1 x 10k
1 x 150k
1 x 1M

Transistors
1 x BC108
1 x BC109

Pots
1 x A500k

Other
1 x Stereo 1/4" jack
1 x Mono 1/4" jack
1 x battery clip
1 x DPDT switch

As far as sourcing parts, all of these can be ordered from Small Bear Electronics (www.smallbearelec.com), with the possible exception of the transistors (though they might have those too).

[petemoore]

  You might want to make Q2C bias resistor a trimpot.

[hw2nw]

excuse the newbie question, but is the 820R just an 820 ohm? and what's a 2K2? I see 2K's but not 2K2. (I'm browsing Small Bear by the way).

[GREEN FUZ]

excuse the newbie question, but is the 820R just an 820 ohm?

correct.

what's a 2K2

To make it more legible on a printed page the decimal point is usually replaced by a letter so it`s 2.2K.

[Boprikov]

2K is close enough to 2.2K. (or 2K2).