switching between resistors

[hendriko]

so, here's my plan (or idea - whatever you wanna call it)

i'm planning on building a fuzz face with a couple of mods to it (mostly roger mayer mods)
what i wanted to know though is if there is any way that i could have both values for the resistors (both original FF and RM) and use a switch to switch between them?

and, if its possible...could i only use one switch to switch between lets say 2 or 3 different resistor pairs? (like 1. all roger mayer 2. all FF resistors)


a schem would be really helpful too
cheers
hendriko

[jonathan perez]

sure, with a 3PDT, or even a 4PDT switch...

[hendriko]

but where would the signal come from?

i mean the resistors are in different places of the circuit and have the signal coming from totally different places?
you wouldn't be able to draw a small schem up would you?

[Meanderthal]

 I don't think you'll be able to do all that with one switch, unless ya build both FF circuits and switch between them.

Here's a diagram to give you an idea how to switch ONE(1) resistor, cap, diode, whatever value... in this case it's clippers, but...

http://aronnelson.com/gallery/The-Mod-Zone-%21/clip_switch

[hendriko]

ah crap...well, i don't wanna build that whole thing twice
i guess i'll just put them in with sockets and see how it turns out


thanks for the help

[Meanderthal]

 Yeah, jeez, besides the resistors, the cap values, the pots... just too much for a big switch...

But, you could get a whole bunch of switches and have a box like a porcupine...

[hendriko]

eh...good idea theoretically
but i don't wanna go through all the hassle with my first build:P

if there was an easy way to switch em all...i'd do it
but a swich for each pair - no thanks haha


thanks again
cheers