Question about ROG Mr. EQ

[g.g.]

Hey,

I'm building a fuzz, a 12ax7 preamp and a ROG Mr. EQ in 1 housing.

(edit: imageshack links removed here due to hijack ......)

I have a question about wiring the switches. How do i wire them (which contact is a, which is b and which is c?) What about switch #2? it has 6 contacts?

The switches i got are:

#1  3 contacts (on/on)
#2  6 contacts (on/off/on)
#3  3 contacts (on/on)

See bottom of this link:

http://runoffgroove.com/MrEQ-layouts.pdf

[GREEN FUZ]

Sorry, can`t help with the wiring but your build looks damn good. Did you make the enclosure yourself?

[B Tremblay]

For the LO and HI switches, you'll need to use the 3 contact SPDT on-on switches.  Just wire to the middle lug and one outer lug for A and B.

For the MID switch, you'll be using just half of the switch.  The middle lug is grounded and it really doesn't matter which outer lug you choose to designate as A or B.

[snoof]

Yes, nice enclosure!!  One thing I noticed about LED's mounted near the footswitches is that sometimes your foot covers up the light.  Just an FYI   I had to move mine to the top area so they aren't blocked.

[g.g.]

Sorry, can`t help with the wiring but your build looks damn good. Did you make the enclosure yourself?

Thanx, i madi it myself with some hardwood and a piece of aluminuimsheet, 1mm thick.

For the LO and HI switches, you'll need to use the 3 contact SPDT on-on switches.  Just wire to the middle lug and one outer lug for A and B.

For the MID switch, you'll be using just half of the switch.  The middle lug is grounded and it really doesn't matter which outer lug you choose to designate as A or B.

Okay, that was what i needed to know, thanx