AMZ FX ANALOG ALCHEMY GEOFX MEF ROG DIY WIKI

Russian npn germanium transistors GT311

Started by Meanderthal, February 11, 2007, 05:25:45 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3
User actions

bluesdevil

#40
July 25, 2007, 06:06:09 AM
That would be looking from the top, sorry.
"I like the box caps because when I'm done populating the board it looks like a little city....and I'm the Mayor!" - armdnrdy

MetalGod

#41
July 25, 2007, 06:32:44 AM
thanks, I'll see if I can get them to bias up with this new pinout  :-\

petemoore

#42
July 25, 2007, 09:37:11 AM
Pete: With the ground leg facing you, the pinout should be BCE, if you have the same ones.
  How are you ID'ing the ground leg ?
  Mine have the little black dot nearest one outside leg, and the legs exit the body and form an arrow shape [the middle lead is offset].
  With the transistor standing' in front of me, and the offset lead facing me [ie the 'arrow' pointing toward me...
Convention creates following, following creates convention.

MetalGod

#43
July 25, 2007, 05:04:23 PM
Ok, I managed to get a spec sheet from the guy on ebay I bought them off...

bluesdevil

#44
July 25, 2007, 05:37:58 PM
Damn, I just uploaded a labeled pic. Here it is anyway:
http://aronnelson.com/gallery/album129/GT311
"I like the box caps because when I'm done populating the board it looks like a little city....and I'm the Mayor!" - armdnrdy

MetalGod

#45
July 26, 2007, 09:44:43 AM
Quote from: bluesdevil on July 25, 2007, 05:37:58 PM
Damn, I just uploaded a labeled pic. Here it is anyway:
http://aronnelson.com/gallery/album129/GT311

hey, thanks for that anyway - appreciate the effort.

fwiw, that's the pinout I worked out using the diode tester on my DMM but couldn't get it to bias up - still can't with any pinout   ???
Print
Go Up Pages 1 2 3
User actions