fuzz face layout

[luko-man]

ive had a crack at the fuzz face. i'd love it if you could have a look for me and tell me if its right.

Layout: http://www.aronnelson.com/gallery/main.php/v/diyuser/Fuzz+Face.gif.html

Schematic: http://www.diystompboxes.com/pedals/gusFuzzFace.gif

Thanks for you time guys

-peace

[BAARON]

Glancing at it, I would say yes, except that R8 should be 100 ohms (100R), not 100k ohms.

[Gus]

I make the 5K a full size external pot.  C3 and C1 value are starting points.
  C3 has a big affect on the sound.  One of the early if not first web sites having information about adjusting the input cap size.
http://www.geocities.com/sunsetstrip/studio/2987/britface.html
.022uf

try .1uf, .22uf, .047uf, 01uf etc. for C3.  I sometimes make the input cap switchable

Some sound clips of a circuit close to this one(same distortion engine) in this thread
http://www.prodigy-pro.com/diy/index.php?topic=32333.msg392327#msg392327

[luko-man]

okays thanks guys. i might add some mods to it and get the resistor fix. when ive modified it i will come back and post them

-peace