which resistor controls output volume on a Clyde Mccoy?

[B_of_H]

I need to lower the output on this sucker, it's WAY too much boost to use live.   I searched through trying to find similar topics and couldn't find one. 





I want to put a 100k trim pot in if possible.  Any help would be much appreciated. 

[kurtlives]

The resistor that was 68K stock controls output level.

[B_of_H]

The resistor that was 68K stock controls output level.

thanks for the response.  Could you point it out to me? 

I found this schem but it's for the orginal version I believe.

[kurtlives]

The resistor (68K) that is in series with the input cap. Generally with 68K you get a slight loss of volume when the effect is engaged.

[B_of_H]

The resistor (68K) that is in series with the input cap. Generally with 68K you get a slight loss of volume when the effect is engaged.

I'll take a look and follow the trace from the input.


I just noticed that C2 is missing (between C5 and R17).  Is this inetentional from the factory or could this be the source of the problem?