Housing to delays in one enclosure

[seibertdr]

I am new at building effects and I am looking for something simple. I am looking into buying two Danelectro FAB delays and putting them into one enclosure. How do I connect the output of one delay into the input of the other delay inside the enclosure?

Thank you for your help.

[ppatchmods]

you can find a diagram for this at generalguitargadgets.com  I just used it to build a rat + dod 250 in 1 enclosure.  It was very helpful!

[seibertdr]

Do you have a link to that. I have been all over the website and was not able to locate it. Thank you.

[ppatchmods]

Here is Dragonfly's version:

http://aronnelson.com/gallery/main.php/v/DRAGONFLY-LAYOUTS_0/The-Mod-Zone-_/WIRING_2_FX_IN_1_BOX.gif.html

I'll have to get back with you on the GGG link.

-John

[earthtonesaudio]

If the ONLY thing you change is the enclosure, and you keep the switching system and all that extra stuff, you could just hardwire the output of one to the input of the other, and use the stock switching system for bypassing.

[seibertdr]

If the ONLY thing you change is the enclosure, and you keep the switching system and all that extra stuff, you could just hardwire the output of one to the input of the other, and use the stock switching system for bypassing.

That is kind of what I am looking for. Being new, I am not sure where the wires go.