Choosing the right Echo Base PCB please help

[Filament]

I've finally decided to build the Echo Base and after reading the entire Echo Base thread and visiting the anonymousfacelesscoward site a gillion times, I've come across two different layouts. 

I don't read Japanese but if I understand the babelfish translation, these are identical layouts but one is just smaller.  Can anyone confirm this as well before I pay someone to etch me the board?

Here's what I believe to be the latest layout, I'd like to use it if it is indeed the same and smaller

And heres the older version

[craig_in_tx]

I used the older version on mine and it worked like a charm.  Size was not a problem for me, but then I used a 1790NS enclosure due to all the pots, the toggle switch, and the 3PDT stomp switch.  Still had quite a bit of room inside.

Hope that helps. 

[Filament]

Thanks craig.  I looked at the two layouts side by side and it seems the older one would be easier to populate so maybe I'll go with that one first time out.   

[audioguy]

those knobs used by anonymousfacelesscoward are freakin cool... anyone know where they can be picked up???

[junkwork]

Hi everyone I'm anonymousfacelesscoward. How about my layouts? Isn't there any troubles?

audioguy
I'm using japanese parts shops, I bought that knobs at Garrettaudio.

http://www.garrettaudio.com/
http://www.garrettaudio.com/knob.html

I don't know if they can ship to you...

[andrew_k]

Hi everyone I'm anonymousfacelesscoward.

Thank you for your PCB designs! 

[composition4]

I also used the older version made mine a few days ago - worked great first time! (Well, second really - modulation didn't work because I thought I would try LM358 instead of TL072 in the LFO section... didn't work. The LFO doesn't tick in the slightest anyway). Nice work by anonymousfacecoward/junkworks, much appreciated

Jonathan