crazy neovibe speed issue

[starekase502]

i just finished the neovibe and it sounds great
one small issue
i used a regualar dual audio pot for the speed not a reverse
i wired everything just as the diagram shows
i was under the impression that it should have worked backwards (clockwise slowing)
however clockwise speeds up the effect and the range from slow to fast is stuffed at the end of the pot rotation
ive checked the wireing several times and checked to make sure i deffinatly have a regular tapper dual audio pot
ive read somewere that on the ggg file c and e are reversed but then ive read this has been fixed any ideas

thanks for any help

[SteveB]

Yep. Same thing with mine when I built it a long time ago.
Get the Alpha Dual-Gang 24mm REVERSE Audio Taper 100K
SKU: 1004 from Small Bear.
http://www.smallbearelec.com/Detail.bok?no=115

Steve

[starekase502]

thank yu very much steve
didnt think i would gt a respond that quick

[mdh]

Or, at least for the time being, you could tie the wipers to the clockwise lugs instead of the counterclockwise lugs as in the diagram, and swap the outer wires.  That should give you the desired behavior.