AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

These parts were not listed on Rg's Neovibe list Errrrrr

Started by jimbob, February 28, 2009, 04:10:20 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jimbob

February 28, 2009, 04:10:20 PM
OK- so I wanted to build the Univibe but after thinking I bought all that was needed from smallbear according to RG's part list I realized these were not a part of my order since they had no part number.

Can These parts be found locally? Radioshack?  Socket For Univibe Lamp
SKU: 0711
PRICE:     $0.75
http://www.smallbearelec.com/Detail.bok?no=665

Lamp, Screw Base, 1.5 Volt, 25 ma.
SKU: 2321
PRICE:     $0.85
http://www.smallbearelec.com/Detail.bok?no=645

OF (Huh)

Lamp, 12 Volt 40 ma. Bi-pin # 7371
SKU: 2323
PRICE:     $1.05
http://www.smallbearelec.com/Detail.bok?no=716
"I think somebody should come up with a way to breed a very large shrimp. That way, you could ride him, then after you camped at night, you could eat him. How about it, science?"

R.G.

#1
February 28, 2009, 06:20:52 PM
Sorry to mislead you. But I didn't use a socket; the bulb was on lead wires and soldered in. That's why I didn't list a socket.  :icon_biggrin:
R.G.

In response to the questions in the forum - PCB Layout for Musical Effects is available from The Book Patch. Search "PCB Layout" and it ought to appear.

smallbearelec

#2
February 28, 2009, 11:06:17 PM
Do bear in mind that R.G. did the article years before I had sourced all the OEM parts. RS has a few wire-lead lamps ranging from 1.5 volt to 12 volt that are known to work with proper adjustment of the bias.

RedHouse

#3
March 01, 2009, 12:23:03 AM
Also, bear in mind the original Shin-Ei "Uni-vibe" didn't use screw-base lamps either (or lamp sockets) so you should be ok without them too:



Print
Go Up Pages1
User actions