Dano, need some help or anyone

[23]

ok IM looking at Dano TS stacking op amps right  http://www.beavisaudioresearch.com/projects/Sreamerlab

I understand how to stack em and how to wire them to the switches 1 and 7 pin out to the DPST but what about the wiring going from the first two rows of poles from the switches that are running back to the board?
OK stack the ops and then pin 1 and 7 run out to the DPST, do the first rows of the DPST wire back under the board to the socket to pin 1 and 7? I mean the op amps ahve to be in the socket and the socket has to be soldered into the board so is my assumption right or am i missing something here?

also whats the best value resistor to use to equal out the gains its said from 10-50 ohms, what did you use dano?

thanks scott

[grathan]

Yeah, It looks like you could "tie them all together" and solder that underneath the board.

[23]

thats what im thinking too and use one resistor at the tie ins to equalize the gain from each IM thinking a 10 OHM as it being lowest, dont really know why just seems ok to me anyone to correct me?