News:

SMF for DIYStompboxes.com!

Main Menu

tim's square wave

Started by Br4d13y, May 13, 2009, 12:12:11 AM

Previous topic - Next topic

Br4d13y

for anyone that has built this, about where should the internal sensitivity trimpot be turned? i have found a few places that sound decent, but i don't know where it will operate at its prime


thanks ;D
freedom is the freedom to say 2+2=4

boog

i swapped the trimmer with a 1M pot; seems to work best on the far right and straight up and down

biggy boy

Do you have a link to it?

boog

unfortunately no; i don't seem to have the technology required for that fun stuff.

Taylor

Quote from: boog on June 07, 2009, 04:49:01 PM
unfortunately no; i don't seem to have the technology required for that fun stuff.

Not sure what this post means, but I assumed he meant a link to the schematic. If so...

http://www.geocities.com/tpe123/folkurban/fuzz/swsh.gif

Taylor

I just built this, and I think it should be pretty intuitive how to set it. The idea is to set it so that it doesn't constantly hum but isn't too gatey. Unless you want it gatey.