Anywhere to get large sheets of Veroboard?

[pappasmurfsharem]

Many of the boards I see are fairly "small"

Is there any large sheets of vero. Like 1ft by 1ft or similar that I can use to cut up into smaller boards.

Many i've seen from the standard parts sources are fairly small and I'd hate to not have the ability to use custom sizes.

[roseblood11]

500*100mm: http://www.banzaimusic.com/Board-STR-500.html
but shipping is quite expensive...

[digi2t]

I buy mine from here;

http://www.veroboard.com/

They sell on Ebay under the «Pixel Print» moniker. They go up to 11 x 19 inches, and have very good prices.

[pappasmurfsharem]

I buy mine from here;

http://www.veroboard.com/

They sell on Ebay under the «Pixel Print» moniker. They go up to 11 x 19 inches, and have very good prices.

How obvious. Now why didn't that come up in my google searches? lol

Thx

Anything Stateside? $8 shipping is a bit much

[defaced]

Even with shipping their price per sqin is lower than anything I found.  I use them too. 

[digi2t]

I buy mine from here;

http://www.veroboard.com/

They sell on Ebay under the «Pixel Print» moniker. They go up to 11 x 19 inches, and have very good prices.

How obvious. Now why didn't that come up in my google searches? lol

Thx

Anything Stateside? $8 shipping is a bit much

As far as I've found, they are the cheapest, even with the 8$ shipping. And their boards are of very good quality. I've used them exclusively for all my builds.

[pappasmurfsharem]

I suppose you are right, $8 was just high for that single item.

HOooooowever, They have a decent size (840 pnt) breadboard for cheap ($3.99) and a 86value X 50 Piece resistor pack (E12 1%) for $29

SO those two and a 4" x 10 " stripboard for $44 shipped isn't too bad.

[davent]

Five more dollars and i believe you ship for free.

[pappasmurfsharem]

Five more dollars and i believe you ship for free.

Well $50 but that would be before shipping.