Boss OS-2: Alternate wiring

Started by ghostsauce, September 08, 2010, 05:12:30 PM

Previous topic - Next topic

ghostsauce

Got a few problems I need help with if you guys have some time.

http://ghostsauce.net/random/Boss%20OS-2%20-%20Schematic.jpg
http://ghostsauce.net/random/Boss%20OS-2%20-%20True%20Bypass.gif

Ok, so I'm putting my OS2 into a box with another circuit & wiring them both for true bypass and running off the same DC jack. I took the switch out (I think, lol) by removing Q1 and Q6 and jumpering their outside leads, and then I also removed R38 and C24. I believe that accomplishes what the 'true bypass' schematic intended, but can you guys confirm please?

I've been studying the schematic this afternoon and I found the board in and out for signal, but the 9V seems to ride in with the signal. Is this right?  IE: When I wire it like this I'll need to tie the +9V wire to the same wire as the input signal? Looks right to me but it sounds like it should be wrong, heh. 

Also, I can't find an obvious spot on the board to connect the ground. :s

I believe that if I can get those answered, I can just treat it like any other pcb and wire it like that diagram I linked to.

ghostsauce