Please help verify - Condor Cab Sim

[spule]

I spent a lot of time making this and now my eyes hurt   
So here it is:



schematics: http://www.runoffgroove.com/condor.html

It's my second (complete) layout and I expect some errors, so if anyone can spot any, please let me know!

[ehofherr]

  Try to turn Q1 90 degrees.  The pinout is shown below:

                              __
                             | D \ <------ 100 K Trimmer/47n Cap)
GAIN Lug 3 -------> | S |
18 K Resistor-----> | G /
                              ---

  I didn't get any further, the blue trace is tough on my eyes. 

[spule]

Thanks Ehofherr!

Here's the updated version:

[ehofherr]

  Okay, now flip the J201 180 degrees and leave the wiring......


              _______                                   _______
FROM:   | D  S  G  |  (currently)       TO:  | G  S  D  |
              \______/                                  \______/

  Reference ROG at http://runoffgroove.com/condor.html and the layout here: http://runoffgroove.com/condor-perf.png and the pcb layout also:http://runoffgroove.com/condor-pcb.pdf

[spule]

Ah- thanks!
I've been looking at the rest of the layout for some time and it seems good to me. Also - thanks for the references you posted- I found them before, but i wanted to make my own layout.. It just feels better 

[roseblood11]

Does anyone have a small veroboard layout for the Condor?