Hello all! Building a TS808 Clone, looking for some assistance.

[Seraphblood]

Hi everyone, I figured this would be a great time to join this forum, because I am in the process of building my own TS808. I have custom made a schematic in Eagle, a sort of mongrel based off of a few I found on the net. I am actually in the process of routing the PCB, but I figured this would be a good time to come here and see if I could get some more experienced eyes on this. I will be uploading my schematic and PCB Routing to my imageshack, so I can show you what I need some help with. Basically, my concern is with the wiring of the 3PDT switch I am including, and the DC Power Jack/Battery area that goes into the voltage divider. I am not quite sure I have laid it out correctly, and really need to be certain it is correct before I go forward. None of the schematics I have found are of much help. I appreciate any and all help, thank you.

[Seraphblood]

Apologies for the double post, but I have my schematics and PCB Routing uploaded now.

The logical schematic for my build:



The schematic, tailored to building the PCB:



The routed PCB layout (Not quite done):