GM Arts Overdrive PCB Layout

[jdub]

Hey all-

Worked up a PCB layout for the GM Arts Overdrive for those who are interested.  Tested, verified and ready to go:
Layout


PCB Transfer


Project image w/ values is here:
http://www.aronnelson.com/gallery/main.php/v/jdub/GM+Arts+Overdrive+Project.PNG.html?g2_imageViewsIndex=1

It has more jumpers than I'd like, but after fiddling with it for way too long I was like, %@$# it, good enough.  The component list in the project image has stock values, but I'd advise experimenting, especially with the diodes.  I laid out D5 and D6 to accept four SIL sockets to allow for series diodes; I ended up using a 1n60 and a 1N914 for each and it sounds really good.  I recommend socketing D1 and D2 as well- I used BAT41s there.  I used a 4558 for the opamp, but might change it.

Anyway, enjoy.  Any questions, lemme know.  Cheers!