AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

"Bobtavia" Perfboard Layout with 3pdt switch & LED

Started by soupbone, April 01, 2011, 06:52:03 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

soupbone

April 01, 2011, 06:52:03 AM
Does anyone have a "Bobtavia" perfboard layout with a 3pdt switch & LED?I've seen some veroboard layouts in the gallery,but I'm going to build it with perfboard instead.Any help would be greatly appreciated!!

thegnu

#1
April 01, 2011, 09:38:07 AM
why don't you just use perfboard and complete any traces you need with some bare solid wire?

soupbone

#2
April 01, 2011, 03:44:37 PM
Quote from: thegnu on April 01, 2011, 09:38:07 AM
why don't you just use perfboard and complete any traces you need with some bare solid wire?
That's what i was going to do,I just don't have a layout for it with a 3pdt switch with led.

blooze_man

#3
April 01, 2011, 05:18:21 PM
Just hook up the switch and LED the same as you would any other circuit.

http://www.beavisaudio.com/techpages/StompboxWiring/
Big Muff, Trotsky Drive, Little Angel, Valvecaster, Whisker Biscuit, Smash Drive, Green Ringer, Fuzz Face, Rangemaster, LPB1, Bazz Fuss/Buzz Box, Radioshack Fuzz, Blue Box, Fuzzrite, Tonepad Wah, EH Pulsar, NPN Tonebender, Torn's Peaker...

soupbone

#4
April 02, 2011, 08:02:26 PM
Quote from: blooze_man on April 01, 2011, 05:18:21 PM
Just hook up the switch and LED the same as you would any other circuit.

http://www.beavisaudio.com/techpages/StompboxWiring/
Word!Thanks!
Print
Go Up Pages1
User actions