hyperion debugging help

[jolly1423]

I've built this on vero-
http://tagboardeffects.blogspot.com/2012/03/devi-ever-hyperion.html#links
everything just like it looks but I get NO audio. I've re-flowed all the solder 2 times, check over the layout and check for continuity where applicable and I've started in on it with an audio prob. Audio makes it to lug 1 of 'intensity pot' and is variable as it should be, I have no audio at lug 3 of that pot. Audio doesn't even make it past the first cap (the one under the first cut-reading left to right).
transistor reading-
Q1
c-.7
b-.01
e-0
Q2 and Q3 both-
c-.59
b-.01
e-0

I know those are way off from where they should be but I can't figure out why!

[PRR]

Measure Battery voltage *at* the 10K resistors.

[jolly1423]

Going in to both I have 8.95v. At the bottom of the first is .7 and at the bottom of the second .6 (left to right).

[PRR]

Solder whisker. PCB etching whisker. Bad solder joint. Very low-price (or specialized) needle-meter.