Marshall Blues Breaker Vero layout ?

[dave4567]

Would anyone happen to have a vero layout for the Marshall BluesBreaker?  Any help would be appreciated.

[dave4567]

Since I couldn't find a vero layout , I tried doing my own. I used the schematic from GGG's True Bypass. If anyone has the time can they check this out for mistakes. Thanks.


http://www.aronnelson.com/gallery/main.php/v/Schematics-etc/Marshall.jpg.html

[cab42]

I haven't checked the layout, but you can make it a few rows smaller

1. Move 9V (and D1) two rows down
2. Move the .22cap to gain 3 a few holes to the right. Move the lower pin one row up, place a trace cut between that pin and the resistor, and move gain 3 to the right of the board.

BTW: I have Torchys BB vero layout. PM me if you are interested. However, its much more fun to use your own.

[dave4567]

Thank you for the suggestions Cab42