Dr. Boogey Mods

deadastronaut · May 24, 2012, 05:40:39 AM

size it to the size of your size of your trimmers and your good to go...

MarkusVG · May 24, 2012, 05:45:54 AM

Nice

thanks deadastronaut!

MarkusVG · May 24, 2012, 09:38:42 AM

Last question for now, I'm using the Gaussmarkov/MartyMart PCB layout. But the letters are in reverse, do I need to flip the layout to get it etched, or can I use it as it is?

J0K3RX · May 24, 2012, 10:04:29 PM

Quote from: MarkusVG on May 24, 2012, 09:38:42 AM
Last question for now, I'm using the Gaussmarkov/MartyMart PCB layout. But the letters are in reverse, do I need to flip the layout to get it etched, or can I use it as it is?

No, it's a mirror image.. after you etch it will read the right way on the board.

MarkusVG · May 25, 2012, 05:36:57 AM

Okay, thanks

I'm planning on using it with a 9V adapter instead of a battery, does it need any redesigning for this? I will use a OneSpot adapter (I've had great experiences with this adapter).

deadastronaut · May 25, 2012, 05:47:19 AM

that'll be fine!...i never use batteries.

just make sure you get a plastic dc jack...not a metal one!.

MarkusVG · May 25, 2012, 07:48:08 AM

Okidoki

Damn you guys are great! I've sent the PCB layout to the company here, it will be here in 3 days. Black PCB, with greencoat and fully tinned #NICE!

MarkusVG · May 26, 2012, 11:22:41 AM

Hey guys!

I'm wanting to replace C13 to C15 with ''Miller caps''. However, here in The Netherlands, most electronic stores havent heard about Miller Capacitors. Are there any specific types of capacitors that have the ''Miller effect''?

alfafalfa · May 27, 2012, 05:51:57 AM

Quotemost electronic stores havent heard about Miller Capacitors

Die bestaan ook niet !! = They don't exist !!

What is meant these small caps are used to create the same "Miller" effect like tubes have . It has to do with capacitance between plate and screen and input and output. Look it up : just google.

Here is a very clear explanation: http://www.aikenamps.com/MillerCapacitance.html

Hopelijk help dit ! = Hope this helps !

MarkusVG · May 27, 2012, 07:40:57 AM

Dankjewel Alfa

Zeker bruikbaar!

I have ordered all components, so I'll soon start building this

Thanks everyone!

WGTP · May 27, 2012, 03:45:49 PM

The Tone control from the SPITFIRE would work well. Socket the caps for easy tuning.

MarkusVG · May 28, 2012, 08:24:22 AM

I'm going to use the SWTC2 Tone control, simple but effective

deadastronaut · May 28, 2012, 08:30:56 AM

Quote from: WGTP on May 27, 2012, 03:45:49 PM
The Tone control from the SPITFIRE would work well. Socket the caps for easy tuning.

yeah that would be good!...

News:

Dr. Boogey Mods