CHASM REVERB

[deadastronaut]

cool, glad you enjoy it..

thank the guys on here too...particularly samhay..

he helped a great deal on it...and prevented my usual 1000 page thread 

[bluebunny]

and prevented my usual 1000 page thread 

I saw what you did there, Rob!  You started a new page!   

[deadastronaut]

ha ha.... got ya!!!...

[bluebunny]

977 to go...   

[deadastronaut]

we could always post 12,789 pictures of sausages...

[stallik]

Or one sausage with loads of Chasm reverb

[samhay]

Not sure how I feel about standing between Rob and another 1k page thread, so I will join in to...

[bluebunny]

we could always post 12,789 pictures of sausages...

Now you're talking.   

[abakuzam]

Hello again, can you explain to me what "damp" control actually does Sorry for noob question, half deaf here

[deadastronaut]

hi, it acts as a tone control....cutting highs, etc....

[abakuzam]

hi, it acts as a tone control....cutting highs, etc....

Thanks mate, btw i put "kia 7805" regulator, its still kinda warm, not hot to not touch but its warm, maybe its because of it has more metal area to give away heat? My chasm reverb draws about 60mA, 65 with all pots full with bright white led, is that normal? İ don't have any short circuits in my pcb, i checked it 10 times, all voltages are normal, tl074's legs about 4,3-4,5v, when i swtich to osc, leg 3 is 1.87 volts same as j201's source, drain is same as the tl074's voltages, everthing works perfectly but i dont want to destroy my belton
Thanks.

[samhay]

>My chasm reverb draws about 60mA, 65 with all pots full with bright white led, is that normal?

That sounds about right.

[abakuzam]

>My chasm reverb draws about 60mA, 65 with all pots full with bright white led, is that normal?

That sounds about right.

Yeah its normal but its kinda weird that my 7805 gets warm warmer than 78l05 :S

[bluebunny]

You did put it in the opposite direction to the 78L05?  The pinouts are mirrored: 78L05 = OGI, 7805 = IGO.

[Jdansti]

[abakuzam]

You did put it in the opposite direction to the 78L05?  The pinouts are mirrored: 78L05 = OGI, 7805 = IGO.

Yeah reversr Pinout, i put in reverse, got warm, i tried the iç before putting into thr pedal, have me around 5.06 v without load, then i put it on the pedal, i get thre same values, pedal working awesome as always , but it was warm @65mA i put thr 78L05 again,

[samhay]

The 7805 still has to dissipate as much heat as the 78L05. However, you may notice this more with the 7805 if you touch the heat sink - the metal will likely feel warmer than the plastic.

[deadastronaut]

use it to keep warm...

[stallik]

Does it warm up the sound?
If it gets hot enough, will it produce mojo smoke? Or glow enough to replace the LED?
I've got my coat..

[Jdansti]

Feel the "Bern"! 

Hand me mine too, stallik...