What pedal has the largest BOM?

Started by MrBinns, May 12, 2015, 02:09:16 AM

Previous topic - Next topic

MrBinns


R.G.

I'd have to go count, but it has to be something like the Ludwig Phase II or the Maestro Rhythm-N-Sound for the Guitar.
R.G.

In response to the questions in the forum - PCB Layout for Musical Effects is available from The Book Patch. Search "PCB Layout" and it ought to appear.

FiveseveN

Don't know if it "counts", but I was looking at the Digitech GSP2101 (analog distortions + rather ancient DSP) and the BOM stretches over 5 full pages.
Quote from: R.G. on July 31, 2018, 10:34:30 PMDoes the circuit sound better when oriented to magnetic north under a pyramid?

digi2t

Quote from: FiveseveN on May 12, 2015, 10:31:47 AM
Don't know if it "counts", but I was looking at the Digitech GSP2101 (analog distortions + rather ancient DSP) and the BOM stretches over 5 full pages.

Not a pedal.

I'm sure there must be some bigger than the Ludwig. Infinitphase maybe?
  • SUPPORTER
Dead End FX
http://www.deadendfx.com/

Asian Icemen rise again...
http://www.soundclick.com/bands/default.cfm?bandID=903467

"My ears don't distinguish good from great.  It's a blessing, really." EBK

FiveseveN

Quote from: digi2t on May 12, 2015, 12:14:56 PMNot a pedal.
Crap, I only just realized that! ;D The Ludwig and Maestro are barely "pedals" as well, to be fair. And I'm sure there are other similar Digitech and/or Boss multieffects in floorboard format.
Quote from: R.G. on July 31, 2018, 10:34:30 PMDoes the circuit sound better when oriented to magnetic north under a pyramid?

Mark Hammer

Quite possibly this: http://www.premierguitar.com/articles/Inside_the_ADA_Harmony_Synthesizer   One of the last ditch attempts to accomplish in the analog domain what would eventually be done more easily, cheaply, and in a smaller package, in the digital domain.



It is a single effect in a floor pedal format.  More detailed review here: http://hammer.ampage.org/files/Device1-4.PDF

armdnrdy

If it doesn't win largest parts count...it definitely takes most ICs hands down! 40+
I just designed a new fuzz circuit! It almost sounds a little different than the last fifty fuzz circuits I designed! ;)

graylensman

Plus it has a stick of dynamite wired in there.

antonis

Quote from: armdnrdy on May 12, 2015, 03:55:22 PM
If it doesn't win largest parts count...it definitely takes most ICs hands down! 40+
Yes but try to imagine it with descrete semiconductors items construction... :icon_wink:
"I'm getting older while being taught all the time" Solon the Athenian..
"I don't mind  being taught all the time but I do mind a lot getting old" Antonis the Thessalonian..

Luke51411

Quote from: graylensman on May 12, 2015, 04:13:59 PM
Plus it has a stick of dynamite wired in there.
For self destruction so it can't be reverse engineered, although it kinda looks like one of the resistors already self destructed on that one

Mark Hammer

My sense is that the designer likely self-destructed.  Aren't you glad you didn't have to work out the layout for that one?

deadastronaut

https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

MrStab

Recovered guitar player.
Electronics manufacturer.

armdnrdy

I just designed a new fuzz circuit! It almost sounds a little different than the last fifty fuzz circuits I designed! ;)

MrBinns

I was just curious. I saw a pic of an A/DA Flanger and wondered what pedal has the most parts.

PRR

> Anything with 150+ components?

Not a pedal; but the parts suppliers took out a dozen pages of ads mentioning their products were used in this project.

WABC (AM, NYC) built a new transmitting site in 1942.

  • SUPPORTER

Tightpants

I've got a PT2399-based delay design with a part count of 260! I wasn't going to post it because I thought it was too complicated but if anyone is interested??

digi2t

Quote from: Tightpants on May 16, 2015, 03:01:15 AM
I've got a PT2399-based delay design with a part count of 260! I wasn't going to post it because I thought it was too complicated but if anyone is interested??

Post away!!
  • SUPPORTER
Dead End FX
http://www.deadendfx.com/

Asian Icemen rise again...
http://www.soundclick.com/bands/default.cfm?bandID=903467

"My ears don't distinguish good from great.  It's a blessing, really." EBK

Tightpants

OK I've put it in the digital & dsp section as it uses a microcontroller (Picaxe). But be warned it's built on vero!

Morocotopo

Boss DC2. Over 100 R´s and close to 100 C´s. And the IC´s.

I have a four PT2399 delay in the works, over 100 R´s and 100 C´s. Single sided PCB! Migth end up with full on tendinitis after I build it... and crossed eyes.
Morocotopo