1776 Rub-A-Dub Deluxe

[mp3j3rk]

Has anyone built the 1776 Rub-A-Dub Deluxe with the board on the 1776 website?  What size of enclosure did you use and would you mind posting a few pics?  I'm debating between this and deadastronaut's chasm reverb.  Still a beginner and feeling like the rub-a-dub might be a little closer to my level, but I really want to do the chasm sometime regardless.

Also, on the 1776 BOM, there is a second Mix pot listed with the same value as the first, 50kB.  Is that a faux-pa or is there really a second 50kB pot needed?  Seems like it's extraneous to me.

Thanks for any and all responses!

Dylan

[midwayfair]

99% sure it won't fit in anything except a 125B.

[davent]

There's 1776 sub forum over at madbean's, you might want to post there to get the low down on this and all their other boards.

http://www.madbeanpedals.com/forum/index.php?board=32.0
dave

[mth5044]

A link to the build document you are talking about would be useful, but if IIRC, the two mix pots you are seeing are a dual-gang pot. Have a look at the BOM in the build doc.

[davent]

A link to the build document you are talking about would be useful, but if IIRC, the two mix pots you are seeing are a dual-gang pot. Have a look at the BOM in the build doc.

Here's the link. Just the one, single 50kb mix pot.

http://1776effects.com/wp-content/uploads/2015/03/Rub-a-Dub-Reverb-FAB-BOM.pdf

[mth5044]

A link to the build document you are talking about would be useful, but if IIRC, the two mix pots you are seeing are a dual-gang pot. Have a look at the BOM in the build doc.

Here's the link. Just the one, single 50kb mix pot.

http://1776effects.com/wp-content/uploads/2015/03/Rub-a-Dub-Reverb-FAB-BOM.pdf

That's the normal one, the OP is talking about the deluxe version.

http://1776effects.com/?product=rub-a-dub-deluxe

In any case, you're right, there aren't any dual mix pots. What I was thinking of was the decay pot. Perhaps that is what the OP meant?

[davent]

Whoops, skipped over the "Deluxe".

[strassercaster]

i used the layout for it on tagboard effects its a very easy bui
d and that will fit into a 1590b i am pretty sure. i use 125b or 1590trp for everythin now and once and while i use the 1590bbm for massive builds like univibes or stereo chorus pedals.the rub a dub deluxe is really cool . i have some extra bricks for sale ill sell you one for 15 plus postage if you want. i will even through in a precut pre drilled vero if you want

[chuckd666]

I built this and put it into a 1590BB, but I also had a Meathead and a Plexi-sim circuit in the same box (it was tight). I think it should be doable in a 1590B!

And yep, just the one mix pot.

[midwayfair]

There's really no need to guess. The board is as wide as three 16mm pots with dust covers next to each other with a little bit of extra space. Can you fit that in a 1590B? I don't think I can.

[chuckd666]

Yeh tru.

[chuckd666]

If you scroll down a little here, some guy seemed to be able to fit it into a 1590b style enclosure. I mean the PCB is 55mm wide, and the pots seem to fit within those bounds.