insanity box layout questions

[rutabaga bob]

Yes, I have used the search function, but haven't come across this...yet, anyway:
First off, the circuit...
   http://www.diystompboxes.com/pedals/insanity.GIF
    http://www.diystompboxes.com/pedals/layouts/inlay.jpg

Sorry, I don't know how to snag them and post them here.

The pcb shows a 100uF cap a couple of spaces below the large IC, but the schematic doesn't have such a value, nor do the vero layouts I've come across.  Those of you who have built this: is it right?

Also, the schematic shows a .11uF cap up by the tone section...is this a typo?

I have listened to demos of this and really like it, and am ready to get into the build.  Please advise.
Thanks!   Larry

[slacker]

Referring to the schematic the 100uF cap is connected across "to CD4049AE +" and "to CD4049AE -" so if you just leave it out then that part of the layout will match the schematic. I don't know if the 0.11uF cap is a typo but the layout has 1.1uF in same position, the cap just under trim 2 on the layout, 0.1uF should work fine. I wonder if the layout is for a different version than the schematic.

[aron]

You can use a .1uF instead of .11uF - won't make a difference.

[rutabaga bob]

Ah, the man himself! 
My thanks to you both!

[digi2t]

I used 0.1uF. My vero is here;

http://www.aronnelson.com/gallery/main.php/v/digi2t/veros/Insanity+Box/Insanity_NEW_BOM.jpg.html?g2_imageViewsIndex=1

[rutabaga bob]

Saw that during my Google search...I'm surprised, given all the diy-ers that seem to really dig this circuit, that there aren't more layouts of all types.

Thanks!

[digi2t]

Saw that during my Google search...I'm surprised, given all the diy-ers that seem to really dig this circuit, that there aren't more layouts of all types.

Thanks!

Well, Leslie West said it best. "In a room full of gasoline, how many matches do you really need? One. And a back up."