Top mounted jacks

[POTL]

Hello everyone, I want to assemble the pedal in the case of 1590n1
I will use this socket
https://lib.chipdip.ru/460/DOC001460412.pdf
What audio connectors suit me?
Neutrik Nys 215?
I want everything to look like this
http://www.bestguitareffects.com/wp-content/uploads/Wampler-Ego-Compressor-Review-Best-Ross-MXR-Dyna-Comp-Pedal-03.jpg?ee4787

[GGBB]

Those Neutrik/Rean jacks are 20mm wide: http://www.rean-connectors.com/zoolu-website/media/download/5958/Drawing+NYS215. That DC jack is 9mm wide. The inside width of the end panel in a 1590N1 is about 48mm (I measured mine). So no - the NYS215 will not work. The Neutrik M series are a little narrower at 18.2mm so will just fit: http://www.neutrik.com/en/audio/plugs-and-jacks/jacks/m-series/, but their slim series are 15.75mm wide so they might make things easier: http://www.neutrik.com/en/audio/plugs-and-jacks/slim-jacks/.

[POTL]

Thank you
I wonder how Wampler managed to establish the usual nests there?)

[GGBB]

Thank you
I wonder how Wampler managed to establish the usual nests there?)

They don't use a 1590N1 - so it may have a little more room - but their jacks look like Neutrik M series to me, not Rean NYS.