Wiring a 2 in 1 pedal

[d a v e]

Hey, I'm new to this forum and attempted to find this with a search but couldn't find it. Sorry I'm sure this has come up before.


I'm trying to put together a 2 in 1 pedal. Its a fuzz + tremolo in a wah enclosure with the rate controlled by the wah pot. I'm trying to wire it so both can be engaged when I stomp it on but also have a 3 way switch so I can choose to have each on independently when I stomp. This is my first attempt at a 2 in 1 and was wondering if you guys have advice for how to wire it.

Thanks! Dave

[d a v e]

nah?

[granite]

Well, this may be the dumb answer but you could definitely do it with two stomp switches. Just like as if you had two independent pedals.

Switch 1 - effect 1, switch 2 - effect 2.

Stomp both, you get both, and so on 

[GibsonGM]

Well, this may be the dumb answer but you could definitely do it with two stomp switches. Just like as if you had two independent pedals.

Switch 1 - effect 1, switch 2 - effect 2.

Stomp both, you get both, and so on 

This is probably simplest, in my opinion.   I'm sure you can rig up a toggle to set "1 on, 2 off....2 on, 1 off...both on" and then stomp, but really, it's only one small foot move with 2 independent stomp switches! 

[ElectricDruid]

Another vote for two footswitches to give you independent on/off for each pedal. The only question that leaves you is what order to put the two effects in...

HTH,
Tom

[antonis]

Common sense  imposes for setting Fuzz in front of Tremolo..
(but you can try them with aligator clips in place of Jack_IN - Jack_OUT lugs before final setting..)