Hyper Light - the ring modulated delay pedal

[Jamforthelamb]

Yes please! I would totally be down for a board!
-Kevin

[patrick398]

nice work! now just run that through a HT8950...

Not come across that chip before, looks like a lot of fun!

[BluffChill]

Update!
- made board smaller so it will fit in a 1590B!
- ordered a prototype run of these which should be with me in the next 10 days. All being well, these will be for sale!
- had quite a few people interested in a board so if 5 people buy one, I'll post schematic so y'all can make your own because I am nice!
- I will also post a vero layout

Thanks all for your interest!

[patrick398]

Where abouts in the UK are you out of interest?

[BluffChill]

Where abouts in the UK are you out of interest?

South West England


Sent from my iPhone using Tapatalk

[patrick398]

Cool, in that case i won't be collecting in person haha

[thehallofshields]

Can you post a sound-clip with the carrier frequency tuned to a note?

[BluffChill]

Can you post a sound-clip with the carrier frequency tuned to a note?

I'll post something tomorrow.


Sent from my iPhone using Tapatalk

[matmosphere]

If you need five people to buy one I'd defiantly be in. I love noise but I've always been looking for a way for my signal to not just turn to mushy sound, this seems to fit the bill. 

[BluffChill]

Boards are made and on their way across the sea to me!


Sent from my iPhone using Tapatalk

[BluffChill]

OK folks, I got two boards, and a batch of 30 on the way, should be here within the next two weeks.

Quite a few of you have expressed an interest in a board, so if you're still interested, please send me a message - also let me know if you want to pre-order one to reserve one when the batch comes through.

The boards will be £12 including postage for UK people, or £15 for USA folk including postage (that's about $21 currently I believe)



Happy Hyper Light drifting!

[BluffChill]

Put one in a case today.

It's rad! So pleased with this effect. Got some boards on the way, hit me up if you want one.

[patrick398]

Just re-staking my claim to one of those boards haha! Moving flat tomorrow so would nice to have something to get cracking on when my desk is up an running again

[BluffChill]

Just re-staking my claim to one of those boards haha! Moving flat tomorrow so would nice to have something to get cracking on when my desk is up an running again

Great stuff! Will message you.


Sent from my iPhone using Tapatalk

[BetterOffShred]

Board came today!   it looks great, and the supplied build notes are fantastic and even include a possible mod page.  I'll be building this later this week, I'll report back. 

[BluffChill]

Glad it arrived safely! Looking forward to hearing your feedback.

[Marcos - Munky]

This is really cool!

[BluffChill]

What's up folks!

I now have a bunch of these on sale on eBay to make it easier to buy them. Not sure if I'm allowed to link you here so I will delete if necessary.

https://www.ebay.co.uk/itm/282842216604

[orbitbot]

Yay, finally got all the parts ordered and delivered. Apart from a spst switch that I thought I had  Going to a local place to pick one up today, though.

In the build doc, there was a section on modding, with the following

Use an ON-OFF-ON switch and hook the extra pole up to pin 1 of the frequency pot via a 4.7k
resistor. This made the ringmod tone go mad. Might be better as a momentary stomp.

Could someone explain that again, I'm not really following. Is this to replace the existing glitch switch, or a completely separate switch that's otherwise wired to... itself? Which is the "extra pole"?

[BluffChill]

Yay, finally got all the parts ordered and delivered. Apart from a spst switch that I thought I had  Going to a local place to pick one up today, though.

In the build doc, there was a section on modding, with the following

Use an ON-OFF-ON switch and hook the extra pole up to pin 1 of the frequency pot via a 4.7k
resistor. This made the ringmod tone go mad. Might be better as a momentary stomp.

Could someone explain that again, I'm not really following. Is this to replace the existing glitch switch, or a completely separate switch that's otherwise wired to... itself? Which is the "extra pole"?

That would be in place of the glitch switch - so instead of an spst use one of those so you have that extra pole. It's just a guide - experiment, go crazy! Hope you enjoy it


Sent from my iPhone using Tapatalk