Parasit Studio - Quantum Defrakulator help? CD4013 bouncing?

[duck_arse]

as ringed wiring is not allowed. the rivets can expand with soldering heat, the lug goes loose and you have an intermittant fault to find. the lumpy solder joint in the wrong position can also short to the case - fails when you've assembled it, but works when you pull it out - another fun thing to track down.

nice work on the fix, when can we hear it?

[anotherjim]

[Tome]

as ringed wiring is not allowed. the rivets can expand with soldering heat, the lug goes loose and you have an intermittant fault to find. the lumpy solder joint in the wrong position can also short to the case - fails when you've assembled it, but works when you pull it out - another fun thing to track down.

nice work on the fix, when can we hear it?

Hey - yes.. im aware of that potential grounding issue.. ive encountered it before! This circuit will be housed in a wooden enclosure.

Here's a quick video of the circuit in action that I just recorded: https://www.youtube.com/watch?v=3uoMG78lrqo

Also, here's another video I made a few months back  - just as something to do that you might enjoy also.. the diy pedal movie!

https://www.youtube.com/watch?v=gAG5vhhIqI0&t=229s

Again, thanks for all your help!

[Jdansti]

Good job on the build, Tome!

Good job on the troubleshooting, Jim!