Longer threaded bushing on PCB stereo jack needed

[Big Fat Walrus]

Hey there-

Does anyone know of a Stereo PCB mount jack that has a threaded bushing length of .375? With the standard 3/8 32 thread?

Something like this:https://www.neutrik.com/en/product/nrj6hm-1-au, but with a longer thread on it? The linked jack does not fit through my instrument's control cavity with enough room to start threading the lock nut on. This jack: https://www.switchcraft.com/1-4-stereo-3-conductor-jack-w-nut-and-washer-375-long-bushing-double-open-circuit/l12b/ will thread just fine, but the Tip plug is too long and hits the cavity cover.

So does such a PCB mount beast exist?

Thanks in advance

[Ripthorn]

Would this work? https://www.taydaelectronics.com/hardware/6-35mm-1-4-plugs-jacks/6-35-mm-1-4-righ-angle-stereo-female-connector-thread-lock-panel-mount.html

[Big Fat Walrus]

I don't think so...

I need something with the pin spacing like the Neutrik version. The PCB board I have is made to fit those pins - it looks like the Tayda pins are in much different places. But maybe with some sort of adaptor it would work