Pictures!

zeta55 · August 06, 2009, 03:23:08 PM

Quote from: John Lyons on August 02, 2009, 10:33:50 PM

Woh, that is a beauty, very nice.
If I had your skills on woodworks.

/Krister

gutsofgold · August 06, 2009, 06:46:09 PM

John, what two circuits are in there if you don't mind me asking? Looks like it could be a WH Camel clone.

John Lyons · August 06, 2009, 08:31:53 PM

The guts are my "Dirt Halo" and a Fet boost in front of that.
The boost, Fuzz and global bypass are all independently selectable.

Sounds huge, 70's heavy rock and big fuzz when you want it.
This one was a custom order but I'm making a slightly stripped
down version for sale soon. I really like the sounds I've been
getting.

John

burdt · August 07, 2009, 02:57:46 AM

a fuzzrite inside one of my master cylinder enclosures:

juse · August 07, 2009, 03:37:53 AM

Quote from: burdt on August 07, 2009, 02:57:46 AM
a fuzzrite inside one of my master cylinder enclosures:

Very unique... thanks for sharing.

deaconque · August 07, 2009, 10:41:43 AM

Quote from: burdt on August 07, 2009, 02:57:46 AM
a fuzzrite inside one of my master cylinder enclosures:

Man, those boxes are cool.

Fl!P · August 07, 2009, 02:24:19 PM

Quote from: deaconque on August 07, 2009, 10:41:43 AM
Quote from: burdt on August 07, 2009, 02:57:46 AM
a fuzzrite inside one of my master cylinder enclosures:
http://lh6.ggpht.com/_JXMGG3ItcWk/SnvPnDHKlmI/AAAAAAAAAzQ/Lao_CWs3gaU/s800/fuzzrite%20face.jpg
http://lh3.ggpht.com/_JXMGG3ItcWk/SnvPnEnz2sI/AAAAAAAAAzg/MiQ87sTzj-0/s800/fuzzrite%20guts.jpg

Man, those boxes are cool.

Yeah, they look like tanks!

burdt · August 07, 2009, 02:31:31 PM

hehe, that's why i fell in love with them... they're a bit of a pain to work with though because the insides aren't completely smooth. i have to file down all the bumps for the mounted electronics to fit properly.

station · August 07, 2009, 02:32:30 PM

Man, there are some cool things going on here. I love the boxes I've seen so far.

Here are two of my latest:

And a bonus shot: this is what happened when I dropped my EH Wiggler in acid, then sprayed and sanded:

rousejeremy · August 07, 2009, 03:01:12 PM

This looks like Borg technology

Quote from: burdt on August 07, 2009, 02:57:46 AM
a fuzzrite inside one of my master cylinder enclosures:

GeorgeM2 · August 08, 2009, 02:57:44 AM

my VibraCaster (& my guitars

)

jmwreck · August 08, 2009, 03:31:19 AM

Quote from: Ripthorn on August 05, 2009, 01:23:57 PM
Quote from: jmwreck on August 05, 2009, 12:38:03 AM

here is my 2-knob tonebender mkII

Good crap that's efficiency. Not sure how you do that.

just a little bit of patience when soldering i guess!

jmwreck · August 08, 2009, 03:34:36 AM

trotsky overdrive, with GE and SI clipping and a bright switch

Leston Braun · August 08, 2009, 05:19:03 PM

Latest build and first etch.

A Red Llama from madbean/AC layout, no secrets there, goop is only to ensure mechanical reliability.

This one is going for my brother, he likes to be able to control units by his feet, so I put the volume knob to the side, so he won't accidentally kick it down while adjustin the amount of fuzz..

and the guts

edd29 · August 08, 2009, 06:11:23 PM

swell pedal using a metal pick and sans amp with mid range.

Nitefly182 · August 08, 2009, 09:49:52 PM

Wait, the pick is part of the circuit?

azrael · August 08, 2009, 10:24:10 PM

^If that's a slow gear type pedal...the metal pick helps make the swell pop out, IIRC.

JKowalski · August 08, 2009, 10:25:28 PM

Quote from: Nitefly182 on August 08, 2009, 09:49:52 PM
Wait, the pick is part of the circuit?

Yes, if I am correct, it triggers a rising slope which modulates a waveform, giving you a reverse attack type sound.

Edd: Very nice looking pedal all round, by the way. The pick jack is a little big for your wire, though! A 1/8 jack would have suited it nicely.

Ive been wanting to design a reverse guitar pedal on that technique (pick switch) for a long time now. I should get around to it. I remember you saying earlier that you built yours from a schematic somewhere, could you point me to it? Just for reference.

I've been trying to personally design all of my projects from this point on - it's all going into my "art/electronics/music portfolio" for college. Self-designed circuits are a great addition, for obvious reasons!

edd29 · August 09, 2009, 05:59:25 AM

Quote from: JKowalski on August 08, 2009, 10:25:28 PM
Quote from: Nitefly182 on August 08, 2009, 09:49:52 PM
Wait, the pick is part of the circuit?

Yes, if I am correct, it triggers a rising slope which modulates a waveform, giving you a reverse attack type sound.

Edd: Very nice looking pedal all round, by the way. The pick jack is a little big for your wire, though! A 1/8 jack would have suited it nicely.

Ive been wanting to design a reverse guitar pedal on that technique (pick switch) for a long time now. I should get around to it. I remember you saying earlier that you built yours from a schematic somewhere, could you point me to it? Just for reference.

I've been trying to personally design all of my projects from this point on - it's all going into my "art/electronics/music portfolio" for college. Self-designed circuits are a great addition, for obvious reasons!

here's the link http://www.diystompboxes.com/smfforum/index.php?topic=78203.0

http://www.youtube.com/watch?v=GWdWrgiCQoY

the pick is my Idea not included to schematic but is easy connect to circuit and the three way switch is addon for easy to control the speed.

GOODLUCK!

edd29 · August 09, 2009, 09:30:10 AM

this is mxr envelope filter wah plus modification

News:

Pictures!