Pictures!

[boog]

skreddy mayo with tone bypass and two transistor boost

[eniacmike]

madbeans sabertooth project.
obviously could have fit in a 1590b or a 125b but I am really liking 4 knobs in a row on 1590bb's lately. I have a zvex mastotron and it just annoys me on the pedal board because I end up with wasted space above it and I can't adjust the knobs easily.

[Pigyboy]

Eniacmike: Do you ever sleep?

[Beros]

Ruby:

[jefe]

Ruby:

Brilliant!! 

I'm affraid I wouldn't be able to use any of my old shoes for something like that. The funk in there would probably eat the components! lol..

[solderman]

Ruby:

I think I would call this one "Wag the dog"

Creddit snyggt slitna skor BTW 

[solderman]

Too often I forget to take pics of my builds. I didn't forget this time. This is a CE-2 Clone from Madbean's wonderful Pork Barrel project.



Because the Trim pot would have been impossible to reach, I rigged up a little method to have the Trim pot off the board and usable.



Jacob

Congrat to a really well done box. I happen to have a 3007 in my bin doing nothing. This project might be a place for it.

BTW next time you have a "trim pot on the wrong side" issue you can do like I did in the same situation.
use this kind of trimpots and drill "wrongly spelled holes." to reach them 


   

[jkokura]

That's clever! That must be a trim pot you can adjust from both sides. That's a really creative solution.

Jacob

[a soBer Newt]

Ye old precursor to the elephant

by asobernewt, on Flickr

[Renegadrian]

Some great pedal PrOn here...Great works!!!

[John Lyons]

ZiPpY

[Galego]

ZiPpY

What is that? The first microscopic pedal?

[John Lyons]

Ha ha! No, it's not on my finger tip, just on a bar stool.

[darron]

laser engraved with Shaun Klinger

[I like Grunge]

Nice! What's inside?

[ShortScaleMike]

Wednesday night work, apologies for bad light/flash photography.

Shaftesbury Duo Fuzz






Modded 808 Tubescreamer



Fuzz Factory

[eniacmike]

dirty little sambas in tribute to my favorite shoes.

[lazerphea]

Barber Silver LTD: my first try at adding some graphics, inspired by Mike's work... I made some mistakes, but I'm quite satisfied with it

[Govmnt_Lacky]

Barber Silver LTD: my first try at adding some graphics, inspired by Mike's work... I made some mistakes, but I'm quite satisfied with it

That looks fantastic! What grit did you sand your enclosure down to? Also, what did you use for the graphics? Was it waterslide?[

[lazerphea]

That looks fantastic! What grit did you sand your enclosure down to? Also, what did you use for the graphics? Was it waterslide?

Hey, thanks a lot Govmnt_Lacky!
I water sanded it with 80,220,240 sand paper, and the graphics is made with adhesive decal inkjet paper: this one!