Pictures!

[vintageRigs]

Based on Tim E. tripple fuzz. No diodes, added a tone stack

[snarblinge]

Nice builds chad, nothing to ashamed of there.

Trams amp particularly well done, smokey and the bandit a long held family guilty pleasure round my family, but then it would have to have been inverted.

Nice

[SmoothAction]

Auto-Wah. Lucifeline decal. TagboardFX "French Fries" (IvIark & Miro are gangsters among men). Pretty decent auto-wah, sounds GREAT with a boost in front. There's a bit of clipping going on, good quack though. After playing with it for a while I'm enjoying the 'grit' it has. It's not a clean auto-wah, the high-mid range has an awesome dirt to it that is intuituve, it feels good to really dig into my strings. The boost in front really makes it quack dramatically AND provides some good rock n' roll crunch. Needs an indicator LED of course.

Voltage rating on the 1uf non-polar capacitor is sufficient, no worries

[SmoothAction]

Oh yea, I forgot this gross thing.

Ibanez DL5 Delay that has been... rehoused or something.

It wouldn't fit in any of my enclosures, including the 1590bb it's strapped to. You can see how hard I worked on this Replacing the super-crappy momentary switch with a DPDT momentary was a good call, its actually a useable pedal believe it or not. Finished her off with some masking tape

[deadastronaut]

^ how on earth is anyone meant to compete with that kind of top quality build....brilliant.

[free electron]

+1 WOW . I asume you going for full future compressor with attack and release and soft-hard knee? I think I need to grow up to start making double sided diy PCB. Are you using one of the Ampeg schematic? I can see large inductor. Actually I was thinking to build one svt 3 pro preamp and started pcb design for it, all on one board except controls to be on separate board, maybe one day...

Yes, it's roughly based on SVT3Pro. The compressor will be placed after the 1st triode stage, before the Gain pot. This way i'll be able to get some dirty sounds using the comp as a booster. It is the simplified version with a single Response knob. I have used it in the past combined with Alembic/Fender type pre and found it totally sufficient. The first switch and the pot from the left is the series/parallel FX loop, which will be put between the tone stack and the output transformer driver (ECC82).

[SmoothAction]

^ how on earth is anyone meant to compete with that kind of top quality build....brilliant.

[bean]

The only thing that could possibly make that delay any better is a battery on the side attached with Velcro.

[roseblood11]

i'd recommend this instead of velcro: https://www.meetb.de/shop/media/images/popup/0302_1.jpg 

Based on Tim E. tripple fuzz. No diodes, added a tone stack

Cool designs! Reminds me of my idea to make a pedal that looks like Herbie:
http://www.theclassicbeetle.com/wp-content/uploads/2008/05/deadwod-herbie.jpg

[midwayfair]

Oh yea, I forgot this gross thing.

Ibanez DL5 Delay that has been... rehoused or something.

It wouldn't fit in any of my enclosures, including the 1590bb it's strapped to. You can see how hard I worked on this Replacing the super-crappy momentary switch with a DPDT momentary was a good call, its actually a useable pedal believe it or not. Finished her off with some masking tape



!@#!ing genius!

[glops]

Another Warmjet for me. Uber fuzz!


Finally built a Rangemaster!


Ibanez Standard Fuzz!

[MmmPedals]

[img]http://sphotos-a.xx.fbcdn.net/hphotos-ash3/537799_439402589462866_604051515_n.jpg[/img

I cant believe I ever bothered drilling holes.

[Greenmachine]

That DL5 is rocking my world.   

[deadastronaut]

there is a ''special'' thread for....erm.....erm....

http://www.diystompboxes.com/smfforum/index.php?topic=68976.0


@glops: cool unique style as always.....

@chad: nice race car design. 

[Jdansti]

I agree. The "organs outside of the body" pedal definitely is a candidate for the other thread (no offense SmoothAction  ). That would also end my reign as the last person to post an ugly pedal there. 

[SmoothAction]

Haha! There are so many great builds coming out these pages I just had to throw a stick in the spokes. I'll snap a gutshot and move it to the "I ride the short bus" thread. 

[vintageRigs]

Trams amp particularly well done, smokey and the bandit a long held family guilty pleasure round my family, but then it would have to have been inverted.
Nice

Thanks! Eastbound and down, loaded up and fuzzing! 

Cool designs! Reminds me of my idea to make a pedal that looks like Herbie:
http://www.theclassicbeetle.com/wp-content/uploads/2008/05/deadwod-herbie.jpg

I'm kinda on a car theme. noticed?  Oh, and it does fly   

@chad: nice race car design. 

Thanks!  First paint job!  it took about three weeks and four cans of paint.  Getting better these days. 

[Processaurus]

Another Warmjet for me. Uber fuzz!

Great work!  Those are my favorite finishes I've seen in a while.  It looks like you buried them for a year.  How do you get your nice antique paint finishes?

[Mustachio]

Awesome etches ! And I love all the new smd stuff people are doing!

[Nikolay]

A new custom guitar buffer from me