Pictures!

mikeford · February 13, 2015, 08:20:41 PM

NEVER drink n post!

vigilante397 · February 13, 2015, 10:32:22 PM

Quote from: mikeford on February 13, 2015, 08:19:56 PM

Great looking build! If you don't mind my asking, where did you get that enclosure?

mth5044 · February 14, 2015, 09:52:35 AM

Quote from: vigilante397 on February 13, 2015, 10:32:22 PM
Great looking build! If you don't mind my asking, where did you get that enclosure?

Quote from: mikeford on February 13, 2015, 08:16:16 PM
The case came from pedalenclosures.com not sure if he is still in the biz...

mikeford · February 14, 2015, 01:55:47 PM

Sorry for the blur!Here are some of the old glass and steel Bell lamp jewel covers that were on the old switchboards. You may want these in your builds in place of that ol plastic or chrome one everybody uses. They are all over eBay.

.You can use a white LED or an extremely bright one of matching colour and i have used a blue LED in conjunction with the white ones to good effect!

vigilante397 · February 14, 2015, 02:54:52 PM

Quote from: mth5044 on February 14, 2015, 09:52:35 AM
Quote from: mikeford on February 13, 2015, 08:16:16 PM
The case came from pedalenclosures.com not sure if he is still in the biz...

Well that's a little embarrassing

Fender3D · February 14, 2015, 03:01:30 PM

Well Nathan, that wasn't the only reply you didn't read...

Quote from: mikeford on February 13, 2015, 08:20:41 PM
NEVER drink n post!

mth5044 · February 14, 2015, 04:42:16 PM

Quote from: vigilante397 on February 14, 2015, 02:54:52 PM
Quote from: mth5044 on February 14, 2015, 09:52:35 AM
Quote from: mikeford on February 13, 2015, 08:16:16 PM
The case came from pedalenclosures.com not sure if he is still in the biz...

Well that's a little embarrassing

sorry, didn't mean to embarace. Just wanted to help.

vigilante397 · February 14, 2015, 09:47:25 PM

Quote from: mth5044 on February 14, 2015, 04:42:16 PM
sorry, didn't mean to embarace. Just wanted to help.

You have nothing to apologize for, completely my bad for not reading previous posts

Quote from: mikeford on February 13, 2015, 08:20:41 PM
NEVER drink n post!

I did see that one though

pickdropper · February 15, 2015, 09:45:59 AM

My most controversial build so far....

Madbean's Dirtbaby board. Graphic based on DaVinci's Vitruvian Man. I tried to keep true to his original vision.

deadastronaut · February 15, 2015, 09:52:35 AM

well he's certainly not shy...

cool..

duck_arse · February 15, 2015, 09:55:55 AM

^ Mr Vitruvian seems to have "lost interest".

MovingInSloMo · February 15, 2015, 11:00:30 AM

Quote from: pickdropper on February 15, 2015, 09:45:59 AM
My most controversial build so far....

Madbean's Dirtbaby board. Graphic based on DaVinci's Vitruvian Man. I tried to keep true to his original vision.

I was like what is is talking abou.. *scrolls* ohhhhh

the sad part is, these days when I hear "controversy" I associate it with some overblown media story

bluebunny · February 15, 2015, 12:18:57 PM

Quote from: duck_arse on February 15, 2015, 09:55:55 AM
^ Mr Vitruvian seems to have "lost interest".

If you play with the knobs enough, the switch goes up by itself.

Perrow · February 15, 2015, 02:08:56 PM

Full disclosure in the 50 year build thread

pickdropper · February 16, 2015, 12:25:07 PM

Quote from: MovingInSloMo on February 15, 2015, 11:00:30 AM

I was like what is is talking abou.. *scrolls* ohhhhh

the sad part is, these days when I hear "controversy" I associate it with some overblown media story

Yeah, I was just joking around about the controversy part. It's a simple, non-accurate representation of the anatomy shown in the original painting. I haven't actually gotten any feedback from anybody that they were offended by it.

Ice-9 · February 16, 2015, 12:30:41 PM

Quote from: pickdropper on February 16, 2015, 12:25:07 PM
Quote from: MovingInSloMo on February 15, 2015, 11:00:30 AM

I was like what is is talking abou.. *scrolls* ohhhhh

the sad part is, these days when I hear "controversy" I associate it with some overblown media story

Yeah, I was just joking around about the controversy part. It's a simple, non-accurate representation of the anatomy shown in the original painting. I haven't actually gotten any feedback from anybody that they were offended by it.

Haha, I hadn't even noticed the switch, erm knob position. I must admit I prefer the up position though.

bluebunny · February 16, 2015, 12:36:43 PM

Quote from: Ice-9 on February 16, 2015, 12:30:41 PM
I must admit I prefer the up position though.

It's your birthday. You're allowed.

bloxstompboxes · February 17, 2015, 11:49:58 AM

It's been damn cold out that last few days so the clear coat looks like crap but I like it. Please see my recommendations thread for some questions I have about it. I advise anyone who builds this to get the deeper enclosure that I think Steve has at smallbear. The voltage regulator sticks out proud of the bottom and I had to snap off the heatsink tab on it to get the bottom on and it still a very tight fit. Doesn't seem to get hot or hurt the regulator so far though.

http://www.diystompboxes.com/smfforum/index.php?topic=109551.msg1002329#msg1002329

vigilante397 · February 17, 2015, 10:26:21 PM

Quote from: bloxstompboxes on February 17, 2015, 11:49:58 AM

Still a great-looking build inside and out!

It's been a while since I checked out the documentation for the Rebote 3.0, is there a reason you can't just use the 78L05 in the smaller package? that's what I always use on PT2399 and Belton builds.

bluebunny · February 18, 2015, 03:36:02 AM

Quote from: vigilante397 on February 17, 2015, 10:26:21 PM
is there a reason you can't just use the 78L05 in the smaller package?

Perhaps just to be on the safe side? The PT2399 datasheet shows an "absolute maximum" current of 100mA - although only 30mA max for a given set of typical AC characteristics. There's three PTs and a couple other chips to consider...

News:

Pictures!