Pictures!

[Cozybuilder]

Agreed, for aesthetics try blue carpet next time.

The box is ace though!

[italianguy63]

Not sure if this "counts," but this is a commercial pedal I bought (Mooer Pure Octave) that I LOVED the sound of but HATED the look of, so I sanded it down and refinished it, and I consider it a huge improvement. With a Fuzz Factory in front of it (the only way to use it, in my opinion) with both upper and both lower octaves it sounds a bit like a church organ, so I nicknamed it ORGANIC. Hands down the best $60 I've ever spent and it will probably stay on my board forever.

A+ on the enclosure
C on the carpet, it does the job but nothing more 

Is that a broken off tooth from the "Hangover" in the bottom left?  Looks like somebody's veneer....  MC

[vigilante397]

much better than the horrible turd with a piece of sweetcorn stuck in it look...

Agreed. The only thing that can make the ugly brown box look worse is the hideous almost-white knob.

C on the carpet, it does the job but nothing more 

I have to agree there as well. We have an unfinished basement so the carpet down there is just whatever scraps we could get for free arranged in no particular order. A classy blue carpet would have been marvelous

Is that a broken off tooth from the "Hangover" in the bottom left?  Looks like somebody's veneer....  MC

I had to run downstairs and remember where I took the picture to find out what it was because it definitely looks like a tooth but it's a scrap of double-stick tape, which is what I use to hold enclosures onto the bed of the CNC machine.

[thomasha]

Last build:
double delay for stereo/parallel/series use with tails (rebote 2.5) , modulation (from the magnus modulus), Tremolo between opamp stages (like the tremulus lune), and a light/dark controled wah-wah, like the lightwah.

I built this for a friend (he just asked for a stereo delay with modulation), since the LFO was already there I did some extra stuff.
The box is a 125, a little bigger than a 1590b and I ran out of knobs during the process




Cheers,
Thomas

[Kipper4]

Woolly mammoth

[bloxstompboxes]

Last build:
double delay for stereo/parallel/series use with tails (rebote 2.5) , modulation (from the magnus modulus), Tremolo between opamp stages (like the tremulus lune), and a light/dark controled wah-wah, like the lightwah.

I built this for a friend (he just asked for a stereo delay with modulation), since the LFO was already there I did some extra stuff.
The box is a 125, a little bigger than a 1590b and I ran out of knobs during the process




Cheers,
Thomas

Somebody bought some dc power plugs from tayda. I have some too but have yet to do anything with them.

[ASchmalex]

Last build:
double delay for stereo/parallel/series use with tails (rebote 2.5) , modulation (from the magnus modulus), Tremolo between opamp stages (like the tremulus lune), and a light/dark controled wah-wah, like the lightwah.

I built this for a friend (he just asked for a stereo delay with modulation), since the LFO was already there I did some extra stuff.
The box is a 125, a little bigger than a 1590b and I ran out of knobs during the process




Cheers,
Thomas

Cool! Gotta admit I'm a sucker for any little box that has more knobs and switches than I have fingers.[emoji3]

[bluebunny]

Wow!  I'm glad I wasn't the one wiring that lot up!  And you ran out of knobs?  What else were you going to add??   

[deadastronaut]

^ is this the entry for the ''how much can i squeeze into a 1590b competition''?..

you win..

[Perrow]

^ is this the entry for the ''how much can i squeeze into a 1590b competition''?..

you win..

Look closer d'Astro, it's a 125 enclosure, still wins, just another competition

[italianguy63]

What does the photocell do?!

[thomasha]

the LDR is for the Deadastronaut's lightwah hand/foot control.

When it's dark the left led lights on, as the led/ldr inside the pedal, creating the toe down wah effect. With light the wah is all heel down. It's nice to play with the foot in the air, between a light source and the pedal.

[italianguy63]

That wacky Astro!! 

Coolio... thanks!

[Pettol]

Nice one, Vigilante!

[vigilante397]

My first few CNC engraved enclosures were a little sloppy, but I think I'm getting the hang of it. These are: my new Klone (I'm not mass producing them and selling them like this, I promise) and a combination Reverb (Dark) and clean boost (Light). It makes perfect sense on my pedalboard, I promise

[gtudoran]

Some guts

[italianguy63]

Very nice work Dexter!

Hey Nathan, haven't you become industrious as of late?!     Very cool.  Aren't those 1590B KLONes fun!!   

EDIT-- you better slow down, or you will run out of parts, thereby needing a Tayda order before the next coupon is revealed.   

MC

[bluebunny]

EDIT-- you better slow down, or you will run out of parts, thereby needing a Tayda order before the next coupon is revealed.   

Oooh! That's gonna smart!   

[vigilante397]

Hey Nathan, haven't you become industrious as of late?!

Well yes and no Most of the pedals I've posted recently were ones that I built a while ago and finished with spraypaint and waterslides, but I'm trying to go back and re-do all the enclosures on my personal board with the CNC machine for a more professional and frankly more durable finish.

So admittedly there isn't a huge risk of my running out of parts, though I am working on a few new builds so I anticipate making another order soon. I'm going to try to wait for a coupon this time, but we all know how that goes

[cloudscapes]

made this thing







nothing original. just a one-off for myself, an overdrive, a jawari, and a well-known 5-knobbed fuzz. few mods and tweaks, relay bypass, wet/dry blend, starve..