Pictures!

[darron]

the washer on the foot switch looks perfect! mmm

[Cozybuilder]

You can get the footswitch washers here:

http://bitcheslovemyswitches.com/#!/Metal-Footswitch-Washer-BAG-OF-10/p/26629491/category=5027572

[balkanizeyou]

My first attempt at waterslide decal. Not too bad, but there's still a lot of room for improvement


and my usual messy wiring. It looked a bit better at the beginning, but I had a lot of problems with this build, which led to a lot of troubleshooting, tinkering and rewiring inside the enclosure (of course it worked perfectly just before I put it in the box).

[jimilee]

My first attempt at waterslide decal. Not too bad, but there's still a lot of room for improvement


and my usual messy wiring. It looked a bit better at the beginning, but I had a lot of problems with this build, which led to a lot of troubleshooting, tinkering and rewiring inside the enclosure (of course it worked perfectly just before I put it in the box).

That's awesome, I love it. And the trick there is to take a picture right after you get through wiring it, that way nobody knows what it really looks like after we troubleshoot it again.


Sent from my iPhone using Tapatalk

[Elijah-Baley]

Nice graphic, balkanizeyou!



This is my Timmy, and it sounds great.
Nothing news about the look, my still-no-graphic-pedals look similar each other, but this is my first 4 knobs (and even a DPDT toggle switch) in a B size box. Inside it is very tight! Almost I couldn't close the box.

[jimilee]

Nice job getting everything lined up.


Sent from my iPhone using Tapatalk

[duck_arse]

why is pepe sad, balkers - he has hypnotoad laser eyes and gold knobs, what more could he ask for?

[balkanizeyou]

what more could he ask for?

a metal footswitch washer and a "treble boost", of course  but there's more reasons to it: Pepe is also sad that his kiwi brother didn't become the face of New Zealand's national flag and for other obvious reasons.

[jlprry]

I thought that since I have been using this forum for help and inspiration for a long time, I thought I would contribute a little. So here is a couple things that I have built.

Big Muff Ram p
i
Tonebender MKII w/OC81D
[URL=http://s1378.photobucket.com/user/OSjody/media/4x6_0077_zpsojfawkkm.jpg.html][/URL]

thanks for looking

Jody

[stallik]

Jody, really good work. Very neat graphics, etch and a wonderfully simple look. Internals look really well excecucted and I love the bright magenta hook up wire  -- I just wouldn't be a ble to resist taking my wire clippers to the ends of the hook up wires. Nothing appears to be touching anything else but it offends my OCD!

[hylandren]

jlprry, I can tell the big Muff Pi enclosure is an etch, but is the Tone Bender as well? Its so precise that it almost looks like a waterslide.
Excellent execution inside and out on both, by the way.

[duck_arse]

jlprry - wow. it was a long wait, but well worth it. nice.

[rutabaga bob]

A/B box

[flanagan0718]

Here is a few of my more recent builds.










Thanks for looking!

-Mike-

[rutabaga bob]

Mike - what's the third one down?

Edit: never mind - I followed the link.

[flanagan0718]

Mike - what's the third one down?

Edit: never mind - I followed the link.

I'll answer anyways...DBA sound saw - madbeans mood ring - order switcher - DBA Harmonic Transformer - jmk blend (for fx loop input). It was a super fun build!

[playsforfun]

Gummy Bear Fuzz complete with snacks. Got an aspiring guitarist-to-be quickly losing interest in practicing? Well maybe there just aren't enough gummy bears during practice time. Enter the Gummy Bear Fuzz. Stomp it for delicious fuzz tones ala the Mastadon Fuzz or crack it open for a sugar sweet snack while you wail those tasty riffs.





I bought this little lunch box a while back for a buck. It still had candy in it. I've been wanting to turn it into a fuzz and finally did. I decided on the Mastadon Fuzz but then only drilled three control holes. I decided to socket the pinch control and find a happy resistor value that works well for me. I put the transistors and electrolytics on the underside because I can with Barry's boards. Still looking for that sweet resistor value but never the less we've got a fuzzy little tubby cubby for the practice room. Looks great in front of the Marshall.

[deadastronaut]

change the led to red, and move it to the right a little...

  cool build,

[GiovannyS10]

change the led to red, and move it to the right a little...

HAHAHAHAH naughty astronaut

[Kipper4]

TrikBox Bird Phaser