Pictures!

[Marcos - Munky]

I used to do cold transfers when making my boards. I print the layouts on glossy paper, wait a few days before doing the transfer - don't know why, but transfers done 1 week after printing the layout went way better than 1 day printed layouts, this was tested by a few more people and we got the same results. Before the actual transfer, I scratch the back of the paper with a knife and clean the board with alcohol. I place the paper on the board, then drop some acetone directly on the back of the paper, being careful to don't let any acetone go between the paper and the board. Then I get anything that can be used as a roller - a cup, a deodorant, a piece of pipe - and roll all over the paper with some presure. Let it naturally dry, then without removing the paper I put some more acetone and do the rolling again. After it dry for the 2nd time, I drop the board in a cup with water to remove the paper. The results are good, and the whole process is easier than iron transfer, but using glossy paper the toner came grey-ish. I believe it's because of the paper itself, since even my iron transfers came grey-ish.

[patrick398]

Maybe it's time i gave this another try. I use the back paper of vinyl sticker sheets which seem to work well and shouldn't contain as much paper fiber so hopefully less greying...
This is especially appealing as i'd like to avoid melting the shiny new painted enclosures i'm buying

[Marcos - Munky]

Probably the results will be way better with this paper. I used the back paper of a A4 sized sticker in a iron transfer once and I remember the transfered toner was darker than glossy paper. Didn't tried to do acetone transfer with this paper.

[deadastronaut]

yeah its the fibres that grey it,  shiney sticker backing is probably ideal,

if a little delicate to handle...well worth a shot though.

[patrick398]

This is the stuff i'm using if anyone's interested:
https://www.ebay.co.uk/itm/A4-White-GLOSS-Plain-Self-Adhesive-Sticker-Paper-Sheet-Address-Label/201007238437?ssPageName=STRK%3AMEBIDX%3AIT&var=500212701276&_trksid=p2057872.m2749.l2649

Pretty generic stuff so i'm guessing anything similar would work just as well

[darron]

haven't shared anything for a while. might get a kick out of this

zvex box of rock clone, layout from Madbean.

[bluebunny]

"haven't shared anything for a while"       

That's the way we like it, Darron.  This one is far too good and it makes the rest of us look really bad!   

[patrick398]

Box of co*k? Very nice! Single colour for off-board wiring...you're a braver man than I! How did you get the textured finish? And how are the graphics applied?

[darron]

Box of co*k? Very nice! Single colour for off-board wiring...you're a braver man than I! How did you get the textured finish? And how are the graphics applied?

thanks. I'm usually lazy with only using one colour of wire

it's laser engrave powder coating. powder is from a local company, Dulux. It's really a great finish because it's tough as anything and covers up any small blemishes. that company also makes some really awesome veins and hammer powders for retro stuff.

[bluebunny]

Box of co*k?

LOL!  But "Boks of cock", surely?   

[darron]

Box of co*k?

LOL!  But "Boks of cock", surely?   

somebody else please build this one now hehe. can't waste a good name.

[temol]

Jfet preamp Engl E530 with headphones amp and cabsim.



T.

[vigilante397]

I love everything you have ever made and this is no exception

[patrick398]

Box of co*k?

LOL!  But "Boks of cock", surely?   

somebody else please build this one now hehe. can't waste a good name.

I have one i made a while ago...i also have a sharpie and a penchant for rude doodles.

[bluebunny]

Box of co*k?

LOL!  But "Boks of cock", surely?   

somebody else please build this one now hehe. can't waste a good name.

I have one i made a while ago...i also have a sharpie and a penchant for rude doodles.

You've said it, Patrick, so now you have to do it.  It's the law.      

[patrick398]

Warning: This pedal contains graphics that some viewers may find disturbing

[patrick398]

Damn looks like the forum's 'modesty filter' has scrambled it 

[bluebunny]

Damn looks like the forum's 'modesty filter' has scrambled it 

It's only a bunch of domestic fowl, fer goodness sake!  ...  Isn't it??   

[duck_arse]

Damn looks like the forum's 'modesty filter' has scrambled it 

It's only a bunch of domestic fowl, fer goodness sake!  ...  Isn't it??   

looks like his bocs burst.

[BluffChill]

Just finished my latest - the Hyper Light 2 (it's a delay with ringmod in the delay path)



Thread here! https://www.diystompboxes.com/smfforum/index.php?topic=119498.0