Pictures!

[bamslam69]

Colorsound 18V Powerboost. Made this for a relative. Just sharpie art, which I found you've gotta wait ages before you consider giving a clear coat sprayover.

[lars-musik]

I haven't posted anything here in a long time. Here's a full one:
Overdrive, Delay, Reverb and Tremolo.

[antonis]

Nice

Sleazy

[Focalized]

Interesting Fat Fuzz Factory build. Using silicone for the PNP transistors. Lowest gains I had about 170. Used a layout that had the 5.1k resistor going to the base of Q3 instead of the collector. It was mentioned in the comments but I missed it. With this mistake it still made a great fuzz without any of the oscillation craziness. The controls just altered things slightly but usefully. Gated sounds and honky mids. So I added that resistor to a switch to select it going to Q3 base or collector. Really works great both ways. I especially like the octave up I can get from it. A bright drive in front when the Fuzz is bassy gets you some really great, high gain Muff like sounds. Really happy with it. I was going to go crazy color swirl but just like the flat black even with the chips it already has.

[JTEX]

My Bass Rockman rehouse

[Focalized]

My Bass Rockman rehouse

I like those knobs. Where from?

[stallik]

While others in the sauna were thinking headrest, I was thinking pedalboard

[ElectricDruid]

While others in the sauna were thinking headrest, I was thinking pedalboard

Well, you would, wouldn't you?!? 

[Phend]

Great idea, playing in the steam at 180 F is fun. Not the guitar, da. Throw some more water on the rocks. 

[JTEX]

My Bass Rockman rehouse

I like those knobs. Where from?

I believe they came from an old Sound Devices audio interface.

[Focalized]

OCD. Don't know why I made this one again, didn't much like it some time ago. Serious mess trying to fit all that at the top.

[ThePracticalPeasant]

My rainbow in progress...

[bluebunny]

Nice. 

I guess with a rainbow pedal board you have to wear ruby slippers? 

[ThePracticalPeasant]

Nice. 

I guess with a rainbow pedal board you have to wear ruby slippers? 

Hmmm, I wonder if that would make me a better guitar player; I've tried everything else besides practicing, maybe I should give it a go. TO THE THRIFT STORE!

On a more serious note, I wish Boss had more options that were red. I don't need a loop station or line selector which leaves the Mega Distortion and Xtortion pedals as the only red options, unless I find myself a vintage DM-2 as I'm not particularly interested in the Waza pedals.

[Focalized]

Silicone Tonebender and Op Amp Big Muff. Still messing with the bender transistors. Either too much gain or too little. The Muff is great with the tone bypass and the tone is intermittent anyway as of now, trying to figure out what's touching what the wrong way.

[tootsMcgee]

Very plain Zendrive build for a friend. We haven't decided on labeling yet. I have some waterslide decals to try but he has access to a laser engraver and I know which one sounds more fun.

Mostly an excuse to practice my soldering...offboard wiring still needs work...

[Mac Walker]

Another fuzz for a friend, (poorly) CNC engraved.




 

[Phend]

Latest PNP build using the inverter LT1054.
ASX12D transistors. With good Hfe's.
Based on GGG Boutique Late 60's PNP Fuzz Face.
Lasered top and mid plates.
Thanks GGG.

[tootsMcgee]

I need emotional support after kludging this together.

Sure, it all works (the depth pot is backwards, ooops...)...nothing is shorting...but I feel dirty. Someone tell me that everything is going to be OK

[bluebunny]

Everything is going to be OK.

I've seen worse.  I've built worse.