Pictures!

[Barcode80]

hammered finish rustoleum spraypaint, copper. it's pretty durable, especially baked. i actually painted the enclosure about 3 months ago, used to house an OD250, not a scratch yet!

[enigmur]

Pimped Vox V847 - Red Rocket (NPN Boost) - Ginger Muff (Germanium Axis Face)


V847 Gutshot


V847 Fasels


Off topic - G&L HB

[rockgardenlove]

What's the white Fasel?

[enigmur]

Its actually just the backs of the red and yellow, the flash kinda made it look like it is joined - theres actually a gap between the two.

[bean]

Here's a Smash Drive I built for a bass player. I added some LED clipping and a SWTC.



The Red Llama. This is a really great sounding one!



And the Thor.

[Hanglow]

Right, I'll get the embarrassment of my first pic out the way... This is my first ever attempt at anything approaching graphic design, I used GIMP. Took ages, not that you would know it.

This was supposed to be an RM Octavia on stripboard with a seperate Easyface. Except I forgot that they were different on the old grounding front...and also the Octavia I made didn't work and I couldn't fix it. So I made up a BYOC tycho octavia, and stuck that in with my Red Llama instead. You can get some filthy sounds out of this I put on those cheap nobs for the minute, when I see some I like I'll fire that on instead. Of course it is mislabeled, but at least I know what the nobs do 

[Baziiil]

Some of my builds
This's Guv'nor.I used plastic enclosure 'cause I can't find Hammond Boxes.I shied it with aluminium foil.Whatever.I used JRC4558D for OpAmp.In clipping stage there is LED 's and 1N4148 's


A Sansamp that I Build.I use New Layout.I coudnt find TLC2262CP.İnstead of it I use TL072.Souds great.Every DIYer must build it.


And I TS808 Build.The EQ switch Changes the value of the input cap.DIST swtich changes the type of diodes(actuallt LED's and 1N4148).The OpAmp is TL072.JRC4558 is little noisy

[christobean]

wow. everyones have been awesome the past few pages

[Fuzzy-Train]

I guess it's pretty obvious that I think this is the greatest pedal ever made.

[QSQCaito]

HAHAHA

Maybe you recognized that Hendrix pic..

[Hanglow]

  It's a great pic of him.  I think he's eyeing up the Red Llama and thinking it would have quite a cool effect to have at his disposal

I thought it looks a bit cheesy, but that little design took more time and swear words than I care to mention, so I couldn't be bothered changing it once I had got that far.

Don't think I'll ever make it as a graphic design artist.

[ambulancevoice]

Some of my builds
This's Guv'nor.I used plastic enclosure 'cause I can't find Hammond Boxes.I shied it with aluminium foil.Whatever.I used JRC4558D for OpAmp.In clipping stage there is LED 's and 1N4148 's


A Sansamp that I Build.I use New Layout.I coudnt find TLC2262CP.?nstead of it I use TL072.Souds great.Every DIYer must build it.


And I TS808 Build.The EQ switch Changes the value of the input cap.DIST swtich changes the type of diodes(actuallt LED's and 1N4148).The OpAmp is TL072.JRC4558 is little noisy

what are those red/black footswitches?

[mattpocket]

what are those red/black footswitches?

+1 

[dano12]

Finally got around to building a Rangemaster. OC44 from Smallbear.



And the little board:

[jlullo]

dano that is BEAUTIFUL

[Baziiil]

what are those red/black footswitches?

The footswitches are TUNIK LK102.It's hard to find DPDT or 3PDT.For DPDT I use them.When you turn it on you can see the position of the switch so I didn't bulid milleium.

[ambulancevoice]

where do you get them?

[Baziiil]

I found on a local component shop .I can't order from net 'cause shipping costs too much to Turkey

[remmelt]

Well, here goes. My first box etch! I used MarkM's great tutorial. Here's the stinker: I used water soluble paint for the edges. I think it can work but you really need to wash off the acid every once in a while so it doesn't burn through. I wanted a nice deep etch so it went right through the paint in some spots. My design was super clean, the pedal being a clean boost (NPN boost, thanks Gus!), but it turned out rather dirty... Let's call it a lesson learned both in etching enclosures and in irony
I ordered some wire over at Banzai and it's really way too thick. I had to cut off several copper strands and it was a real pain to build with. I'm ordering the thinner version next week. The layout really suffers, I think.
Also: it's tough to drill in exactly the right spot without a drill press. I need a drill press.
Also also: note the home made battery snap!

[~arph]

Hey that actually looks really nice! like it has been in the ground for a year and eaten by insects