Pictures!

[JasonG]

NICE!

[Morocotopo]

Thanks, this is my most complicated project so far, almost didn´t finish it!

Morocotopo

[Fuzzy-Train]

Just a little update on my Trem Screamer...

I have a white basecoat on and I just finished putting the first red layer for the tongue. If I'm lucky I'll get the tongue done before I leave tonight, and I'll get the teeth done tomorrow afternoon or something.

[Laika]

Finally got around to finishing off my Noisy Cricket amp. Board was made up in DIY layout creator (tried to make the wiring tidy). added the headphone option from the GGG ruby plans, On/Off via jack, Etched and paint filled housing lettering.

[darron]

Finally got around to finishing off my Noisy Cricket amp. Board was made up in DIY layout creator (tried to make the wiring tidy). added the headphone option from the GGG ruby plans, On/Off via jack, Etched and paint filled housing lettering.

wow. that's an extremely neat build! care to share your method for the two-tone filled etching? was it squeegeed or something?

[ambulancevoice]

Finally got around to finishing off my Noisy Cricket amp. Board was made up in DIY layout creator (tried to make the wiring tidy). added the headphone option from the GGG ruby plans, On/Off via jack, Etched and paint filled housing lettering.

wow. that's an extremely neat build! care to share your method for the two-tone filled etching? was it squeegeed or something?

its not two tone filled
it looks like he painted the top red, sanded it down so the red is left in the lettering, and then the black was added around the sides
with masking probably too

[darron]

Finally got around to finishing off my Noisy Cricket amp. Board was made up in DIY layout creator (tried to make the wiring tidy). added the headphone option from the GGG ruby plans, On/Off via jack, Etched and paint filled housing lettering.

wow. that's an extremely neat build! care to share your method for the two-tone filled etching? was it squeegeed or something?

its not two tone filled
it looks like he painted the top red, sanded it down so the red is left in the lettering, and then the black was added around the sides
with masking probably too

maybe it's the reflection of the flash, but i thought that he actually had a cream coloured paint on the top with red lettering in it, which isn't usual.

[Laika]

maybe it's the reflection of the flash, but i thought that he actually had a cream coloured paint on the top with red lettering in it, which isn't usual.

The top is just sanded metal not painted. It was etched, the top masked and everything painted black, remove mask and fill the lettering in red with a brush, once dry the top was given a final sand.... nothing special but it looks good in the flesh 

[cpnyc23]

Great work there Laika - looks very pro.  Do you sand with an electric sander or by hand?

-chris

[s.r.v.]

where do you get a jack for ipod style headphones? and does it work in stereo with them?

[Valoosj]

Need I say more? 



Still have an issue with it. In bypass this pedal causes some humm, unless when I turn the bias down a lot, then it disappears? Any thought on it Dragonfly?

[Dragonfly]

Need I say more? 



Still have an issue with it. In bypass this pedal causes some humm, unless when I turn the bias down a lot, then it disappears? Any thought on it Dragonfly?

Very cool looking pedal ...i dig the LED eyes !

the bypass issue would have to be with your switch wiring...start by looking there.

[Valoosj]

Will do.
Btw, where can I find the explanation to your swirl technique? The link in the other thread seems to be dead.
I'm kinda starting to like swirls...

[Dragonfly]

Will do.
Btw, where can I find the explanation to your swirl technique? The link in the other thread seems to be dead.
I'm kinda starting to like swirls...

its in my gallery....

I "think" Aron might be moving the gallery folders around, so that would explain the link...

[Zben3129]

To get to it, I just used the gallery link at the top of the forum, then typed dragonfly into the search box. Its on the first page of results.

Zach

[frank]

Professor Tweed goes to Manhattan.

[zeppelinchld]

?

[Zben3129]

Professor Tweed goes to Manhattan.

Whats going on in this picture? Looks quite different

Zach

[frank]

To Zach,
I've tried to make the runoffgroove.com Prof. Tweed but wanted to try Manhattan Style sice it's easyer to mod than vero or pcb.  RF guy use that for silent operation.  Don't know if it is of importance to have ground plane in audio.  But I know that this tweed is DEAD SILENT. Great sound to.
I did not connect the negative feedback loop: would like to put a "presence" pot.

[frank]

Fuzz Face Manhattan style (realy ugly style) also.  I was so in a hury to try a Ge FF. Now I understand the whole universe....