AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

News:

SMF for DIYStompboxes.com!

Main Menu

Pictures!

Started by Hal, August 23, 2005, 01:58:47 PM

Previous topic - Next topic
Print
Go Down Pages 1 ... 252 253 254 255 256 257 258 259 260 261 262 ... 1503
User actions

Dragonfly

#5120
April 04, 2008, 11:02:18 PM
Quote from: foxfire on April 04, 2008, 11:41:04 AM
Care to share what all those knobs do? other than spin i mean. Rylan

just a wild guess...  :icon_cool:

volume, gate, comp, drive, stab


ambulancevoice

#5121
April 05, 2008, 02:12:45 AM
Quote from: Dragonfly on April 04, 2008, 11:02:18 PM
Quote from: foxfire on April 04, 2008, 11:41:04 AM
Care to share what all those knobs do? other than spin i mean. Rylan

just a wild guess...  :icon_cool:

volume, gate, comp, drive, stab



its a silicon pedal, not germ.... :P
but close!...
Open Your Mouth, Heres Your Money

Renegadrian

#5122
April 05, 2008, 07:53:15 AM
Quote from: slymonkey on April 04, 2008, 10:16:53 PM
Quote from: Renegadrian on April 03, 2008, 04:14:08 PM
Here's my Valvecaster 002...



Very cool!  I wonder how long it would take my clumsy foot to over-shoot the switch and crush the tube.  I move around so much I'm lucky to make it back to my pedal board in time to hit the pedal I need.

:icon_lol: :icon_lol: :icon_lol:
Done an' workin'=Too many to mention - Tube addict!

sshrugg

#5123
April 05, 2008, 10:10:35 AM
Quote from: slymonkey on April 04, 2008, 10:16:53 PM
Very cool!  I wonder how long it would take my clumsy foot to over-shoot the switch and crush the tube.

Yeah...tube stompboxes scare me for that reason.  They are sweet looking though.  Maybe one day I'll get the guts.  Awesome build Renegadrian!
Built: Fuzz Face, Big Muff Pi (Stock), Distortion + (Germanium and Silicon versions)

Nikolay

#5124
April 05, 2008, 11:00:12 AM
Two new stombboxes from me:




Timebutt

#5125
April 05, 2008, 11:16:22 AM
Wait, if I get it right the G-Mixer has one input but four outputs? What are you using it for, to feed it to different channels?
Love the etch on the first pedal btw ;)
Completed Projects: Gus Smalley Booster, Modded Russian Big Muff, Orange Squeezer, BYOC Vibrato, Phase 90

Nikolay

#5126
April 05, 2008, 11:21:38 AM
Yes - one - guitar input, and 4 low impedance outputs.
This was not exactly "mixer" but I can't  invent better name.


I use simple buffer based ovet OPA2134 - quad opamp, and 100k pots.

Thanks for the boxes ;)

Zedmin_fx

#5127
April 05, 2008, 01:10:58 PM



the painting isnt that great butt I like it. I have more pedal pics to come

gutsofgold

#5128
April 05, 2008, 02:01:12 PM
Quote from: Nikolay on April 05, 2008, 11:00:12 AM


Clean build! Can you explain why you wire the input jack like that? It looks like the ground goes across both sleeve lugs, and then diagonal across to the tip on one side, and then where? Wheres the ground?  ???

tehfunk

#5129
April 05, 2008, 03:10:31 PM
Quote from: hendrix2489 on April 04, 2008, 10:46:34 PM
my second strat build seen here w/details http://www.diystompboxes.com/smfforum/index.php?topic=66697.0


nice build! I have the same strap, so comfortable and I love the way it looks!
Carvin CT6M > diystompboxes.com > JCM800 4010

The tools of the artist give you a chance to twist and bend the laws of nature and to cut-up and reshape the fabric of reality - John Frusciante

Nikolay

#5130
April 05, 2008, 03:40:18 PM
Quote from: gutsofgold on April 05, 2008, 02:01:12 PM
Quote from: Nikolay on April 05, 2008, 11:00:12 AM


Clean build! Can you explain why you wire the input jack like that? It looks like the ground goes across both sleeve lugs, and then diagonal across to the tip on one side, and then where? Wheres the ground?  ???

Yes. input is connected to GND, BUT only when there is no input jack. And I use 6 pin jack plugs. When input jack is connected the input plate is lift and diconnect from the GND. This is better, because when there is no cable there is no noise.

Input cable is the bottom wire to the jack.

hendrix2489

#5131
April 05, 2008, 03:57:17 PM
Quote from: tehfunk on April 05, 2008, 03:10:31 PM
nice build! I have the same strap, so comfortable and I love the way it looks!

thanks :)

yeah that is the most comfortable strap, way better than the $5 nylon straps that i usally use

zeta55

#5132
April 05, 2008, 06:03:52 PM
Quote from: John Lyons on April 02, 2008, 09:31:33 AM



Thinking outside the box
Thanks Tim!



Now that 's a nice one! Good thinking there :D
I like a lot :icon_biggrin:
Visit my site: http://www.zeta-sound.se/

Renegadrian

#5133
April 05, 2008, 06:32:05 PM
Quote from: sshrugg on April 05, 2008, 10:10:35 AM
Quote from: slymonkey on April 04, 2008, 10:16:53 PM
Very cool!  I wonder how long it would take my clumsy foot to over-shoot the switch and crush the tube.

Yeah...tube stompboxes scare me for that reason.  They are sweet looking though.  Maybe one day I'll get the guts.  Awesome build Renegadrian!

Thank you, Sir!  :icon_redface:
Done an' workin'=Too many to mention - Tube addict!

r080

#5134
April 06, 2008, 01:27:39 AM
Quote from: Nikolay on April 05, 2008, 11:21:38 AM

This was not exactly "mixer" but I can't  invent better name.


multiplexer
Rob

kawayanstrat

#5135
April 06, 2008, 06:22:11 AM
Just finished a Jfet booster for a friend. I like the distressed look. ;D

petemoore

#5136
April 06, 2008, 09:38:10 AM
  distressed~flourescent is >cool lookin' on that one !
Convention creates following, following creates convention.

nelson

#5137
April 06, 2008, 10:05:23 AM














The purple and black one was painted by one of my female minions.

She did a great job, and didn't get a spanking.   :icon_twisted:
My project site
Winner of Mar 2009 FX-X

Dragonfly

#5138
April 06, 2008, 01:54:06 PM
Quote from: nelson on April 06, 2008, 10:05:23 AM
She did a great job, and didn't get a spanking.   :icon_twisted:

I thought that was supposed to earn them the spanking ..   :icon_twisted:

(PS: the boxes look great !)

frequencycentral

#5139
April 06, 2008, 02:07:25 PM
These are my 'Tupperware Turbo's@ :icon_biggrin:

First a Silicon Fuzzface using BC547's

<a href="http://s210.photobucket.com/albums/bb292/frequencycentral/?action=view&current=moto_0039.jpg" target="_blank"><img src="http://i210.photobucket.com/albums/bb292/frequencycentral/moto_0039.jpg" border="0" alt="Photobucket"></a>

http://i210.photobucket.com/albums/bb292/frequencycentral/moto_0039.jpg

.....and an EH LPB-1

<a href="http://s210.photobucket.com/albums/bb292/frequencycentral/?action=view&current=moto_0038.jpg" target="_blank"><img src="http://i210.photobucket.com/albums/bb292/frequencycentral/moto_0038.jpg" border="0" alt="Photobucket"></a>

http://i210.photobucket.com/albums/bb292/frequencycentral/moto_0038.jpg

Tupperware is great for quick and dirty housing of projects! The 'front panels' were made in Publisher and printed onto card, mounted inside the boxes!

Is this legal??
http://www.frequencycentral.co.uk/

Questo è il fiore del partigiano morto per la libertà!
Print
Go Up Pages 1 ... 252 253 254 255 256 257 258 259 260 261 262 ... 1503
User actions